Page 1
Display description Activated mode Bath filled with water Empty bath All functions off Actual time + both dots flashing All functions off Actual time + one dot flashing Filling Counting time since the start of filling the bath with water Drying Drying time countdown 20-0s Letter H (Hygiene) and the cycle countdown (4...
Page 2
User’s manual for operating hydrotherapeutic massage system Lux – Whirlpool, Airpool, Combipool SAPHO Hydro & Air s.r.o. Mělnická 87 250 65 Líbeznice Manufacture and sale of hydrotherapeutic systems www.sapho-hydroandair.cz www.hydromasaze.cz e-mail: info@hydromasaze.cz servis tel.: +420 283 090 770 tech. podpora tel.: +420 283 090 770 tech.
Page 3
The TM62 controller has the following functions (functions are optional according to the system configuration): • Hydro (water) massage •...
Page 4
Button description (function after pressing the button) Figure Bath filled with water Bath without water Water heating Setting the thermostat temperature 1. press – turn water heating on (water Double press to change the set temperature (the heating works only when hydro-massage set value is flashing), the temperature can be is turned on) adjusted by pressing...