Important To Notice; Activating Cooking Zone; To Deactivate The Cooking Zone; Part 4: How To Use - Modena BI Series Manual

Place the induction cooker on the kitchen counter niche, and use the
available clamp from the
screws.
Make sure all parts have been installed and fastened and plug the
stove power cord into the power outlet.
Attention:
Stoves aside from BI 1320 model are not equipped with a switch, and the power cord must be
directly plugged into the power outlet through MCB.

Important to Notice:

- Clean the stove surface thoroughly before using the stove for the first time.
- This induction cooker uses a magnet induction sensor which operates on metal / steel
cooking devices with enamel or stainless coating.
- This stove does not operate on utensils made from materials such as glass, ceramic,
aluminum or other cooking utensils which are not affected by magnet induction.
- Cooking utensils with non-even bottom cannot be used on this stove. Further use will result in
damage to the stove surface.
A C T I V A T I N G C O
A C T I V A T I N G C O
To activate the cooking zone, turn on the induction cooker before placing the cooking utensil directly
on the center of the cooking zone area.
Touch the ON/OFF power symbol for 3 seconds to activate
cooking zone. The stove will emit a "beep" sound and the indicator will
light.
Select the cooking zone by touching the PLUS position in accordance
with the cooking zone to be activated on the control panel
To increase / decrease the heat in t he activated cooking zone:
Touch and hold the plus (+) sign to increase the heat or the minus ( -)
to decrease the heat . It is marked by the numbers on the control panel
(1 to 9)
To deactivat e the cooking zone:
Touch the minus ( -) symbol until the LED on the control panel is turned
off or Touch the ON/OFF symbols
induction cooker packaging to faste n the

Part 4: How to Use

O K I N G Z O N E
O K I N G Z O N E
the
or
English 13