Table of Contents
Advertisement
Unpacking
Field Assembled Alarm Panels
Alarms ordered as separate modules are
assembled on-site.
1. Carefully open the carton(s) and verify
contents.
Refer to diagrams on pages 49-51.
Power Supply Module
•
Instructions
Rough-in components:
•
Mounting box with dust cover
•
(2) End panels
•
(2) Grommets
•
(4) Screws, #6-20 x 1/4
Finish components:
•
Power supply module chassis
•
Trim plate
•
Cover plate
•
(4) Screws, #6-32 x 9/16
•
(2) Screws, #6-32 x 3/4
•
Gas ID and location labels
Digital Display Module
Rough-in components:
•
Mounting box with dust cover
•
Interconnect board
•
(4) Screws, #6-20 x 1/4
Finish components:
•
Digital display module chassis
•
Cover plate
•
(2) Screws, #6-32 x 1-1/2
•
System status labels
6
Part No. 6-847681-00 Rev. D
Sensor Module
Rough-in components:
•
Mounting box with dust cover
•
(2) End panels
•
Gas/vacuum service rough-in
•
(8) Screws, #6-20 x 1/4
Finish components:
•
Sensor
•
Trim plate
•
Cover plate
•
(2) Screws, #6-32 x 1-1/2
Multi-Signal Alarm Module
Rough-in components:
•
Mounting box with dust cover
•
Interconnect board
•
(4) Screws, #6-20 x 1/4
Finish components:
•
Multi-signal alarm module chassis
•
Cover plate
•
(2) Screws, #6-32 x 1-1/2
•
System status labels
Computer Interface Relay Module
Rough-in components:
•
Mounting box with dust cover
•
Interconnect board
•
(4) Screws, #6-20 x 1/4
Finish components:
•
Trim plate
•
Cover plate
•
(2) Screws, #6-32 x 1-1/2
2. Store the finish components in a safe
place for installation after the walls are
finished.
3. Proceed to Rough-In Installation.
Advertisement
Table of Contents
