Setting Time And Date - Baxi AVS77 Instructions Manual

SETTING TIME AND DATE

The first time that the boiler is turn-on or after it has been electrically disconnected for a while, a time and date setting have to be
run (flashing hour symbol).
Follow the following instructions:
1. Press +/- to adjust the hours;
2. Press ;
3. Press +/-
to adjust the minutes;
4. Press ;
Press +/- to set the of the week "DAY"
5.
(1...7 corrisponding Monday...Sunday).
Press to exit DATE-TIME setting.
In order to modify set time and date, press the button
flash, then proceed as described above.
PROGRAMMING (PROG) - AUTOMATIC
HOURLY PROGRAMMING IN HEATING MODE
1. Press and then
2. Select a day of the week (1...7) by pressing +/-
3. Press ;
"on 1"
4. The display shows
Press +/-
5. to set the boiler switching on time;
6. Press ;
"of 1"
7. The display shows
Press +/-
8. to set the boiler switching off time;
9. Press ;
10. Repeat the operations from point 4 onwards to set the remaining three time bands;
11. to exit the function.
Press
MONDY DAY 1 (monday)
TUEDY DAY 2 (tuesday)
WEDDY DAY 3 (wednesday)
THUDY DAY 4 (thursday)
FRIDY DAY 5 (friday)
SATDY DAY 6 (saturday)
SUNDY DAY 7 (sunday)
VISUALIZATION DISPLAY DURING THE PROGRAMMING PHASE
: for few seconds the display will show "PROG" and the time starts to
;
repeatedly;
and the four time digits start flashing, as shown in the following figure;
and the four time digits start flashing;
On 1 Of 1
06:00 08:00
FACTORY SETTING
On 2 Of 2 On 3
11:00 13:00 17:00
1 HEATING programming
2 Day of the week - MONDAY
3 Programmed time band 09:00-12:00
5
Of 3 On 4 Of 4
23:00 24:00 24:00
926.655.1 - GB