Hyperkin CADETP REMIUM Instruction Manual page 2

CONTENTS
CONTROLLER
DONGLE SYNC BUTTON
DONGLE LED INDICATOR
CONTROLLER SYNC BUTTON
CONTROLLER LED INDICATOR
DONGLE CHARGE CABLE
DONGLE
CONTROLLER
FACE BUTTONS
START BUTTON
SELECT BUTTON
D-PAD
MICRO CHARGE PORT
BEFORE YOU BEGIN
• The CONTROLLER SYNC BUTTON is located on the very top of the Cadet near
the MICRO CHARGE PORT.
• The CONTROLLER LED INDICATOR is located on the face of the Cadet near
the top.
• The DONGLE LED INDICATOR is located on the front of the DONGLE.
• The DONGLE SYNC BUTTON is located on the front of the DONGLE.
• The MICRO CHARGE PORT is located on the very top of the Cadet.
SYNCING THE CADET
1. Connect the DONGLE to your NES.
2. Press the CONTROLLER SYNC BUTTON once to begin syncing the Cadet.
3. The CONTROLLER LED INDICATOR will quickly ash BLUE, then light up solid
BLUE when the Cadet is fully synced. If the Cadet is not synced, the
CONTROLLER LED INDICATOR will slowly ash BLUE. Pairing will take about
5-10 seconds.
ONCE YOU'VE SYNCED
• Pressing the CONTROLLER SYNC BUTTON will turn OFF the Cadet.
• Holding the CONTROLLER SYNC BUTTON for 2 seconds will turn ON the
Cadet.
• Pressing ANY BUTTON or the D-PAD will WAKE UP the Cadet if it has gone to
sleep.