Download Print this page

SuperATV SEA-1-00 Installation Instructions

Suspension seat for 2015+ polaris rzr 900/s 900/1000

Advertisement

Quick Links

740B Clifty Drive • Madison, Indiana 47250 • 812-574-7777
Read instructions and view illustrations before beginning.
Need help with your installation?
sales@superatv.com
1-812-574-7777
Thank You
®
© 2015 SuperATV.com
. All Rights Reserved.
(For illustration only. Users Seat may be a different color)
www.superatv.com
8:00am - 9:00pm EST M-Th
8:00am - 7:00pm EST Friday
9:00am - 2:00pm EST Saturday
For Choosing

INSTALLATION INSTRUCTIONS

Suspension Seat:
For 2015+ Polaris RZR
Liability Statement
SuperATV's
products are designed to best fit user's ATV/UTV under stock
®
conditions. Adding, modifying, or fabricating any factory or aftermarket parts will
void any warranty provided by SuperATV
products could interfere with other aftermarket accessories. If user has aftermarket
products on machine, contact SuperATV
Although SuperATV
has thousands of satisfied customers, user should be aware
®
that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride
of machine and may increase maintenance and part wear. Operating any off-road
machine while, or after, consuming alcohol and/or drugs increases risk of bodily
harm or death. No warranty or representation is made as to this product's ability to
protect user from severe injury or death. SuperATV
to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV
occur, SuperATV
will not be held responsible for loss of time, use, labor fees,
®
replacement parts, or freight charges. SuperATV
responsible for any direct, indirect, incidental, special, or consequential damages
that result from any product purchased from SuperATV
user for all damages, losses, and causes of action, if any, shall not exceed the total
purchase price paid for the product that gave rise to the claim.
SuperATV
will warranty only parts provided by SuperATV
®
problems with OEM housings, bearings, seals, or other manufacturers' products will
not be covered by SuperATV
item was not installed properly, misused, or modified.
900/S 900/1000
®
and is not recommended. SuperATV's
®
to verify that they will work together.
®
urges operators and occupants
®
products, user agrees that should damages
®
, nor any 3rd party, will not be held
®
. The total liability of seller to
®
. Any damage or
®
. SuperATV
parts and products are not warrantied if
®
®
IN-SEA-1-001 6/3/2015
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the SEA-1-00 and is the answer not in the manual?

Questions and answers

Summary of Contents for SuperATV SEA-1-00

  • Page 1: Installation Instructions

    No warranty or representation is made as to this product’s ability to 8:00am - 9:00pm EST M-Th protect user from severe injury or death. SuperATV urges operators and occupants ®...
  • Page 2 For Seats without slider mechanism see last page Keep all components removed from Seats Remove Seat Base Remove Slider Mounting Bracket IN-SEA-1-001...
  • Page 3 Place stock Slider Mounting Bracket onto new Seat. Place new Seat Base Tubes onto Slider Mounting Bracket. Note; directional arrows on Seat Base Tubes are to face towards front of Seat. Secure with stock hardware. DO NOT TIGHTEN COMPLETELY. stock hardware stock hardware Slider Mounting Bracket Place stock Seat Base onto Seat Base Tubes and secure with stock hardware.
  • Page 4 Secure Release Strap with provided hardware. Seat Base provided hardware Bolt-Washer-Nut For Seats without slider mechanism: Place stock Seat Base onto Seat and secure with stock hardware. Tighten all hardware completely. Secure Release Strap with provided hardware. Seat Base use stock hardware IN-SEA-1-001...