Do you have a question about the VC80LX and is the answer not in the manual?
Questions and answers
Summary of Contents for CleanStar VC80LX
Page 1
Instruction Manual 80 LITRE CARPET EXTRACTOR Model: VC80LX ● Please read this Instruction Manual carefully before operation and follow all guidelines before using this vacuum cleaner. ● Please keep this Manual for future reference.
Page 2
*** SAFETY RULES & CAUTIONS *** Please be sure to read this Instruction Manual thoroughly before operating the machine. This manual contains important information on the safe operation and maintenance of this machine. If you try to operate the machine or perform any maintenance without reading this manual, it might cause danger to you or other people, or cause damage to the machine or other substances.
FEATURES & TECHNICAL SPECIFICATIONS The VC80LX (80 Litre) Carpet Extraction Machine is intended for cleaning carpet and fabric upholstery. With one wash, the machine completes the three processes of spraying, purge and drying, resulting in a thorough deep clean. Product Features ...
CAUTION: ALWAYS UNPLUG THE APPLIANCE BEFORE YOU REMOVE ACCESSORIES OR CLEANING OR MAINTAINING THE APPLIANCE. MAINTENANCE Always unplug the appliance before you remove accessories or cleaning or maintaining the appliance. Always keep the machine clean. Add 7.5 litres of clean warm water (below 50°C) into the clear water tank. Then start the water pump, nozzle and sucker to run for 1 minute.
Page 5
INSTRUCTIONS FOR VACUUMING To use the machine as a vacuum cleaner, you can use the included vacuum attachments. Firstly you should unclip the solution hose line from the vacuum hose as this is not required when vacuuming. Connect the machine end of the vacuum hose to the square connector on the tank, and then connect the other end of the vacuum hose with the assembled metal wand.
TROUBLESHOOTING Sympton Cause Solution No power supply The power cord is damaged. Replace the power cord. The power supply in the house or Check, repair or replace. building is disconnected or tripped. The power is switched on, but all Power cord problem. the motors run intermittently The switch is damaged.
Thank you for purchasing your new Cleanstar product. We are confident this product will give you trouble-free use and excellent service, provided the operator uses and maintains the product in accordance with the Instruction Manual. Please read the Instruction Manual carefully before using the product for correct operation and maintenance procedures, and store it in a safe place for future reference.
Page 9
If the product was serviced or repaired by anyone other than Cleanstar, or one of Cleanstar’s Authorised Service Agents (ASA). Cleanstar is unable to accept any responsibility under this warranty for any repair work not carried out by an ASA or from the use of non-genuine parts.
Need help?
Do you have a question about the VC80LX and is the answer not in the manual?
Questions and answers