Philips ACT215/05 User Manual page 32

32 upgrading firmware
4
if you have downloaded the firmware file, click
download .ebn file. click Start to proceed.
5
in the next dialogue boxes, click OK.
6
click the hardware icon
psa.
press 2; briefly on your psa so that the device can upgrade itself.
7
the psa display shows briefly: FUpgrade.
note:
– "...file not found. Firmware upgrade failed" if this dialogue box appears on your PC
screen, this could be due to a loose/ interrupted USB connection, or insufficient
battery power. check your USB connection. repeat upgrade operation and make
sure you load a fresh battery. only unplug your psa when the
stopped scrolling completely. also, if you are downloading the upgrade file, make
sure you download only the upgrade file for your specific model, and that you save
and retrieve the file from the same path.
– Battery too low. Upgrade Refused if you also see this message scrolling on your psa
after FUpgrade, this means you need to repeat the upgrade due to insufficient battery
power. always use a fresh battery to perform the upgrade.
– device names may differ to those illustrated, depending on your actual OS and
psa model.
on your task tray, if available, to stop and eject your
first to browse and select your
display has