Advertisement
USER'S INSTRUCTION MANUAL
Art.no: 962461
Art.no: 962463
Work lamp
The light can be used inside (outside), such as repair factories, workshops, building sites and so on.
Warning
• Must connect to IPX4 rated socket outlets.
• Do not disassemble the light if you are unprofessional person.
• If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacture or
his service agent or a similar qualified person in order to avoid hazard.
• Please keep the light out of the touch of children.
• Please make sure the electricity was cut off when replacing the tube.
• Please do not use the light in the plash
Use the light in horizontal way
Use the light in vertical way
When the light is put on the gradient
floor in the vertical position. Please put
the cable opposite the gradient side (see
the picture) to avoid dumpage.
www.barebo.com
Advertisement
Table of Contents
Summary of Contents for BAREBO 962461
- Page 1 USER’S INSTRUCTION MANUAL Art.no: 962461 Art.no: 962463 Work lamp The light can be used inside (outside), such as repair factories, workshops, building sites and so on. Warning • Must connect to IPX4 rated socket outlets. • Do not disassemble the light if you are unprofessional person.
- Page 2 Make sure that the strips over the both sides are almost the same length, then you can put back the board (the side with cable) Pull out the tube jacket in this position 5. Take down the tube 6. Assemble the light in the reverse order Please keep the accessories carefully ! www.barebo.com...
Need help?
Do you have a question about the 962461 and is the answer not in the manual?
Questions and answers