Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Russell Hobbs RHOD20
Summary of Contents for Russell Hobbs RHOD20
- Page 1 INSTRUCTIONS AND WARRANTY MODEL NO. RHOD20 DESCRIPTION: OUTDOOR GAS HEATER...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS Read this instruction leaflet carefully as it has important information both for operational use and your safety. This appliance is a safe and efficient form of heating when used correctly and in accordance with these instructions. Use LPG (Liquid Petroleum Gas) only with this heater. The heater must be turned ON and OFF at the gas cylinder. -
Page 3: Installation
INSTALLATION 3. Proper clearance from combustible materials must be maintained at all times. The minimum clearances are as follows: Important Safety Rules: This appliance must only be used in a well Minimum Clearance from Combustibles: ventilated area. Side 500mm 1. This appliance shall not be installed or used Rear 500mm indoors, in buildings, garages or any other Ceiling 1000mm... - Page 4 surfaces both during use and while in storage. The hose assembly should be visually inspected prior to each use of the heater. If excessive abrasion or wear is evident, or the hose is cut, it must be replaced prior to operating the heater. The replacement hose assembly may be obtained from the manufacturer.
-
Page 5: Parts List
PARTS LIST 1. Wheels 8. Bolt Pack includes: 2. Base • 4 bolts M8x15mm long, nuts and lock washers. 3. Cylinder panel • 5 screws M5x10mm long. 4. Handle • 2 screws M6x12mm long. 5. Burner assy • 3 screws M6x12mm long. 6. - Page 6 STEP 4 STEP 5 Attach door asembly to cylinder panel using 4 Attach burner assembly to cylinder panel countersink screws M4x8mm long and 4 nuts. using 3 screws M6x12mm long.
- Page 7 STEP 6 STEP 7 Position cylinder inside the housing. Attach hose and regulator and leak test both connections.
-
Page 8: Test Firing Heater
TEST FIRING HEATER Test fire heater, following the lighting instructions on heater post. Leak test all gas connections with soapy water. Soap bubbles indicate gas leakage. DO NOT use a match to test for gas leaks. TROUBLE SHOOTING Problem Possible Causes No gas Low gas pressure Main burner won’t light... -
Page 9: Lighting Instructions
LIGHTING INSTRUCTIONS Warning: White smoke may appear around the radiant head during the first minutes of the initial firing. STEP 1. Ensure that the control knob is off. Open the cylinder cover door and slowly open the gas cylinder valve. STEP 2. - Page 10 PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE PRODUCED. W A R R A N T Y Home of Living Brands (Pty) Limited warrants to the original purchaser of this product (“the customer”) that this product will be free of defects in quality and workmanship which under normal personal, family or household use and purpose may manifest within a period of 1 (one) year from the date of purchase (“warranty period”).
Need help?
Do you have a question about the RHOD20 and is the answer not in the manual?
Questions and answers