ELECTRIC GRIDDLE PLATES PSR 400 EE / PSR 600 EE / PSR 900 EE Congratulations for the acquisition of this upmarket appliance made in France. You chose an appliance which alloys the best technical qualities with a big user-friendliness. We wish you the biggest contentment 1.
Device: a griddle plate Accessories: - A drip tray - The present note See exploded views for PSR 400 EE / PSR 600 EE / PSR 900 EE at the end of the document. 3. CONFORMITY OF USE Use the device only to cook meat, bacon, fish, hamburgers, sausages, onions, shell- fishes, vegetables..., and also for fried eggs and omelettes…...
Page 5
On/off pilot light Outlet for juices and fat Thermostatic pilot light Juice collector tray Thermostat / commutator 5. FUNCTIONING / MANIPULATION a) Installation / assembly: - Unpack carefully the device of its packaging. - Place the griddle plate on a plane and heatproof surface. - Never place the device near a wall or near a partition makes of combustible materials even if it is very well isolated.
Page 6
Connection of the device - Check that the tension and the frequency of the electricity network suit to the values indicated on the descriptive plate. - Make sure that every control knob is positioned on 0. - Check that neither the cord nor the plug are damaged - Unwind completely the electric power cable and connect it in a plug connected with the earth.
Stopping the appliance Set each control knob (n°3 on picture) on 0: the green pilot light (n°1 on picture) switches off. The appliance is no longer functioning. Let the device cool. Disconnect the power cable. Clean the appliance. (see 6. Cleaning) d) Breakdown / repair: In case of breakdown or of damaged part, please call your after-sales service and confide any technical operation to qualified person.
During a prolonged non-use, we recommend you strongly to keep the device shielded from the humidity . 7. TECHNICAL SPECIFICATIONS PSR 400 EE PSR 600 EE PSR 900EE Models 400x475x230 mm...
Page 9
Humidity protection degrees IPX4, in conformity with the norm 60335-2-38 (2008) Reach rule Never put the device among household waste. The device must be put down in a centre of recycling for the electric equipments. The materials of the device are indeed reusable. By eliminating correctly the electric and electronic wastes, the recycling and quite other shape of re-use of worn equip- ments, you participate in a significant way in the environmental protection.
Page 10
Nomenclature PSR 400 EE Spare parts PSR 400 EE...
Page 12
Nomenclature PSR 600 EE Spare parts PSR 600 EE...
Page 14
Nomenclature PSR 900 EE Spare parts PSR 900 EE...