Philips SA238/00 User Manual page 35

8
Once the recovery process is complete, click on the Unplug or Eject Hardware
removal icon on your PC task tray. When you reach the message: The 'USB
Mass Storage device' can now be safely removed from the system, click
OK.
• For Windows 98 users, there is no removal icon. Instead, please check your
RUSH shows the READY display, before you unplug RUSH.
9
Unplug and reconnect again. RUSH should now be able to resume operation.
TIP:
– To avoid this problem in future, please avoid unplugging RUSH during installation
and always use a fresh battery when connecting RUSH to your PC.
Malfunction. No reaction to controls and/ or display shows
– Button lock activated.
Switch off
– Electrostatic discharge.
• Remove battery and replace after several seconds.
Sound skips during playback on RUSH
– MP3 file made at compression level exceeding 320Kbps
• Use a lower compression level to record your file into MP3 format.
USB does not connect/function
– You are using an unsuitable USB cable
• Use the supplied USB cable only.
– Cable connections incorrect/ loose.
• Check all connections are correct and well inserted on the RUSH player and
your computer.
– USB driver not installed.
• see page 10-13, Software Installation.
.
Troubleshooting
35