Instar IN-6012 Wireless Connection Manual

INSTAR
1
Connect the camera to your PoE power
supply via the supplied LAN cable (User
Manual Chapter 3 #10) OR plug in the power
supply (User Manual Chapter 3 #12) to start
the camera.
4
Camera Name
Camera ID
Default User Name
Default Password
The QR code contains all the necessary information
to add your camera. Please be aware that the
default login credentials will be used. If you want to
change the default password please check the
Quick Installation Guide. The password can only
be changed in the web user interface.
5
The app will now connect to your cameras
live stream and you will be able to pan & tilt
the device, as well as to activate the audio
stream of the internal microphone and to
take snapshots.
2
INSTAR Model Nr: IN-6012HD
MegaPixel Kamera
Stromversorgung: 100-240VAC 50-60Hz / 5VDC, 1.5A
Mac LAN: 10D1DCXXXXXX
SerienNr: 601200001
Start our Android or IPhone app Instar
Vision. Choose to add a new p2p camera
and start the QR code scanner. Your QR code
is located on a lable on the camera case (s.
above).
6
The wps / p2p method allows you to quickly connect your camera and check the
cameras live stream. Please refer to the Quick Installation Guide for instruction on
how to access additional camera features.
Plug & Play
3
Scan the code to add your IN-6012 as a new
p2p camera and confirm the settings. If you
already changed the camera´s admin login,
please adjust this in the following dialogue
as well.
Power
over
Ethernet