Page 2
Power the AVIS controller Each AVIS controller comes with a single power source which powers all the required components on board. Connect this to the power supply and you are all set up.
• This product shall only be connected to an external power supply rated at 5V DC, and a minimum current of 600-1800mA. Any external power supply used with the AVIS shall comply with relevant regulations and standards applicable in the country of intended use.
Page 4
Keep the device in the enclosure provided. Any tampering will result in the warranty being void. • Do not expose it to heat from any source; AVIS is designed for reliable operation at normal ambient room temperatures.
Page 5
If done so, the warranty will be void and Phoenix Engineers will not be responsible to repair, or maintain the device. Designed By: Infinite Potential H. No. 5213, Road C, Phase VII, Vijaya Gardens, Baridih, Jamshedpur, Jharkhand, India.