Advertisement
TrailMax™ DVD Console Installation Instructions
Install Butt Connectors
Install a Butt Connector on the end of each wire and install the wires from the
DVD wire harness into the other ends of the Butt Connectors.
DVD Wire
Install Butt
Harness
Connectors
Remove Passenger Sun Visor
Use a phillips screwdriver
to remove the two screws
that secure the passenger
side Sun Visor. Set the vi-
sor and screws aside to be
reinstalled later.
Remove 2 Phillips
Screws
Windshield
Rev. A 4.19.07
Route the wiring harness to the passenger side sport bar. Unzip the sport bar
cover and route the wiring harness along the sport bar toward the windshield.
Zip the sport bar cover closed.
Remove the push fastener that holds
the Molded Corner Panel in place. Set
the fastener and panel aside to be
reused later. Then remove the A-Pillar
Panel.
Windshield
Sun Visor
Thread Wiring Harness under Sport Bar Cover
Wire Harness
Remove Molded Corner Panel and A-Pillar Panel
Remove Panel
Remove Push
Fastener
Unzip Sport Bar
Cover
Remove A-Pillar
Panel
Windshield
81705 pg. 4
Advertisement
