Table of Contents
Advertisement
Troubleshooting
how do i reset my player?
Insert a small pin or other sharp object into the reset hole located at the bottom of the player.
Hold until the player shuts down.
if none of the above works, then you may have to use the device
Manager to recover your player:
1
Launch the Philips device Manager at Start > Programs > Philips digital Audio Player
> SA52XX > Philips SA52XX device Manager on your PC.
2
Press and hold the
3
Keep holding the key until the Philips device Manager acknowledges your player and goes
into recovery mode.
4
Click the Repair button and follow the instructions given by the device Manager.
5
After the player has been repaired, disconnect it from your PC and re-start.
Need help?
User Manual
See the user manual on the CD-ROM that is supplied with this player.
Online
Go to www.philips.com/welcome
VOL+
button while your player is connecting to the PC.
Advertisement
Table of Contents
