Download Print this page

NICOR VT2 LED VAPORTITE Installation Instructions

Advertisement

Quick Links

The installation must only be performed by a licensed electrician.
To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the
US or Canadian Electrical Code (CSA 22.1) in Canada.
Disconnect power before installing the product or servicing it.
Wait until fixture has cooled down before installing or servicing the fixture.
MIN. 90°C SUPPLY CONDUCTORS
Suitable for operation in ambient not exceeding 40°C
What's In The Box
One (1) VT2
GENERAL INSTALLATION INSTRUCTION
1
Carefully unpack fixture from packaging and
inspect for any damage caused in shipping.
For Surface Mount: Identify mounting location
3a
and mounting bracket spacing. Use 1/4 in max size
drill bit to drill two mounting holes per bracket in
the surface and attach brackets to ceiling
(Screws and anchors included).
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com April 12, 2018 11:25AM VT2-20 rev 1.1 Page 1 of 4
Hardware Pack
Mounting Clips
(2 Cord Grips, Mounting
(2ft = 2, 4ft = 3)
For all mounting methods.
Tools Needed
A screwdriver, drill, a pair of wire cutters/strippers, and
an M3 allen wrench will be needed to install the VT2.
x2
Hardware)
2
Turn off power to
appropriate circuit
at the breaker panel.
For Cable Mount (sold separately): Identify
3b
mounting location and cable spacing. Use 1/4 in
max size drill bit to drill two mounting holes per
mount. Fasten cable mount to surface and attach
other end to mounting brackets. Adjust cable
height as desired. (Screws and anchors included).
VT2 LED VAPORTITE

INSTALLATION INSTRUCTIONS

Advertisement

loading

Summary of Contents for NICOR VT2 LED VAPORTITE

  • Page 1: Installation Instructions

    (Screws and anchors included). other end to mounting brackets. Adjust cable height as desired. (Screws and anchors included). NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com April 12, 2018 11:25AM VT2-20 rev 1.1 Page 1 of 4...
  • Page 2 CAUTION: For continuous runs the maximum number of fixtures is as follows: 2ft = 40, 4ft = 20 NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com April 12, 2018 11:25AM VT2-20 rev 1.1 Page 2 of 4...
  • Page 3 CAUTION: For continuous runs the maximum number of fixtures is as follows: 2ft = 40, 4ft = 20 NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com April 12, 2018 11:25AM VT2-20 rev 1.1 Page 3 of 4...
  • Page 4 This limited warranty extends only to the first consumer purchaser, and is not transferable. A consumer wishing to invoke the terms of this warranty must first obtain a RGA number within 30 days of discovery of the defect, and return the product to NICOR for inspection. Once verified to be covered by this limited warranty, NICOR will, at its discretion, repair, replace or refund the purchase price of any product that does not conform to this limited warranty.