Set Smartpower Timer; Hibernate The Photoalbum - Philips SPH8528/10 User Manual

Set SmartPower timer

With the SmartPower timer, you can configure
the time for the display of the PhotoAlbum
to turn on or turn off automatically. When the
display automatically turns off, the PhotoAlbum
goes to standby (sleep) mode.
Note
•
Ensure that the current time of the
PhotoAlbum is set correctly.
1
In the home screen, select [Settings] and
then tap OK.
2
Select [SmartPower], and then tap OK.
3
Select [Timer], and then tap .
4
Select [Set On-Time] / [Set Off-Time],
and then tap OK.
28 EN
• To switch off the SmartPower
function, select [Off] and then tap
OK.
5
Tap / / / to set time, and then tap
OK.
Tip
•
When the PhotoAlbum is in standby (sleep)
mode, you can press
PhotoAlbum.
•
When the PhotoAlbum is powered by built-in
battery: After long time without operation, the
backlight brightness of the display lowers and
then the whole set goes to standby mode.

Hibernate the PhotoAlbum

1
In the home screen, select [Settings] and
then tap OK.
2
Select [Hibernate], and then tap OK.
to wake up the