Main Technical Specifications; Product Description; Warranty - Jays s-Go One User Manual

MAIN TECHNICAL SPECIFICATIONS

GENERAL
• Power input 5V DC via micro USB cable (included). Use USB power source.
• Product dimensions. 205mm(L), 33mm(H), 54mm(D), Weight 275g.
• Main chipset, Actions RL6988.
• Microphone embedded for enabling handsfree voice calls.

PRODUCT DESCRIPTION

• Portable lifestyle Bluetooth speaker with built-in battery and microphone.
• Stereo speaker with bass enhancement passive radiator.
TECHNICAL
• Amplifier 2 x 3W stereo Amp with DSP function.
• Bluetooth v4.2. Profile A2DP1.3/HFP1.7/HSP1.1/AVRCP1.6 (SBC codec).
• Battery Li-ion 2200mAh (3,7V), up to 10 hours playback at around 40% volume.
• Battery charge time from zero to full approximately 3 hours.
8 - ENGLISH
POWER SAVING
JAYS s-Go One will go to standby mode automatically, after 20 mins of no usage
or after 5 mins if no device has been connected. This is according to regional
regulations and to save battery power.

WARRANTY

Your JAYS s-Go One is of cause covered by warranty according to regional laws,
depending on country of purchase. Please always consult your local dealer for
warranty issues.
SAFETY
• Only use compatible USB power source to charge the device.
• Do not use s-Go One in wet or dusty environments as it might damage your
device and void warranty.
• JAYS s-Go One should not be used in direct sunlight. Damages caused by
sunlight or severe heat will risk voiding your warranty.
• JAYS s-Go One has built-in Li-ion battery. Please carefully check rules in your
country for safe and correct handling and disposal.
• The battery must not be exposed to excessive heat such as direct sunlight, fire
or the like.
• Never try to open or repair JAYS s-Go One. It will void warranty.
IMPORTANT INFORMATION
ENGLISH - 9