Safety Warning; Technical Support - Simple BTAAX100 User Manual

SAFETY WARNING

Please Read!
This equipment may be reset by unintentional electrostatic discharge during operation. Exposure
to direct sunlight or extreme heat may cause damage or malfunction.
FCC Class B Radio Frequency Interference Statement: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, more of the following
measures:
1. Re-orientate or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that of which the receiver is
connected.
4. Consult the dealer or an experienced radio / television technical for help.
NOTICE: The changes of modifications not expressly approved by the party responsible compliance
could void the user authority to operate the equipment
Specifications:
Operating Voltage: 9-24V
Bluetooth 4.0
FM Frequency Range: 87.5 - 108 MHz
Operating Temperature: -10 to 149F

Technical Support

US
AAMP Global
Tel.: 866-788-4237
support@iSimple.com
www.iSimple.com
www.iSimple.com
facebook.com/isimplesolutions
EU
AAMP Global UK
Tel.: +01-800-477-2267
support@iSimple.com
www.iSimple.com
© iSimple 2019