HAHN & KOLB ORION Instruction Manual

1. Maintenance Instructions:
1.1 Before using the IP66 Electronic Caliper, clean the measuring faces as
well as the surface of the protective sticker with dry and clean cloth (or
soaked with cleaning oil). Don´t use resolvent like aceton or benzol.
Prevent any hydrous liquid from the protective sticker.
1.2 Never apply voltage (e. g. engraving with an electric pen) on any part of
the IP66 Electronic Caliper for fear of damaging the circuit.
1.3 Avoid strong magnetic fields for fear of damaging the electronic.
1.4 As soon as the instrument would be opened from the user the guarantee
will be cancelled – except change of battery.
2. Technical Specifications:
2.1 Measuring ranges: 0 – 300 mm / 0 – 12 in
2.2 Numerical Increment:
2.3 Error limits:
2.3.1 0 – 300mm = 0,03mm
2.3.2 0 – 500mm = 0,04mm
2.3.3 0 – 800mm = 0,05mm
2.3.4 0 – 1000mm = 0,06mm
2.3.5 0 – 1500mm = 0,08mm
2.4 Maximum sliding speed: 1,5m/s (60in/s)
2.5 Power: 1 x 3V (CR 2032) lithium battery
2.6 Power safe function: Auto OFF after 20 min
2.7 Type of protection: IP66
3. Working Conditions:
3.1 Working temperature: 0 ~ +40degrees Celsius
3.2 Storage temperature: -10 degrees ~ +60 degrees Celsius
HAHN+KOLB Werkzeuge GmbH
Borsigstrasse 50
Postfach 30 05 69
Tel. 0711-9813-0
info@hahn-kolb.de www.hahn-kolb.de
Instruction Manual
IP66 Electronic Caliper
0 – 500 mm / 0 – 20 in
0 – 800 mm / 0 – 32 in
0 – 1000 mm / 0 – 40 in
0 – 1500 mm / 0 – 60 in
0,01mm / 0.0005in
1
70469 Stuttgart
70445 Stuttgart
Fax 0711-9813-354