Hibernate Your Photoframe - Philips SPF5010/12 User Manual

To specify the brightness to auto
off, select [Off] and then tap OK to
5
Tap / to adjust brightness sensor, and
then tap OK
To switch off Smart Power function:
In the [Smart Power] menu, select
[Off] and then tap OK
Tip
When the ambient light reaches the set auto
on/off level and lasts about 10 seconds, the
Smart Power (Lighting) function takes effect.
The auto on level must be set higher than that
of the auto off level.
When the PhotoFrame is in standby (sleep)
mode, you can press
PhotoFrame.

Hibernate your PhotoFrame

1
In the home screen, select [Settings] and
then tap OK
to wake up the
2
Select [Hibernate], and then tap OK to
3
Select an option, and then tap OK to
To disable hibernate function,
select [Never] and then tap OK to
EN 45