Assembling Your Vacuum - Shark DuoClean Powered Lift-Away AZ910UK Series Instructions Manual

ASSEMBLING
YOUR VACUUM
TIP: Push hose clip
into back of wand for
convenience.
TIP: For quick cord
access, rotate upper hook
down and remove cord.
TIP: Use cord clip located
on the side of wand to
hold cord in place while
vacuuming.
Place motorised floor
1
nozzle on floor and insert
wand, pressing it in until it
clicks securely into place.
7
+44 (0)800 862 0453
STEP 1 STEP 2
2 Insert handle into wand,
pressing it in until it clicks
securely into place.
STEP 3
3 Place pod onto wand and 4 Connect hose into back of
slide down to connect. pod, pressing it in until it
clicks securely into place.
STEP 4 STEP 5
5 Store included accessories
on the accessory posts on
the pod.
s h a r kc l e a n . e u
8