Advertisement
SafetyLiftinGear.com
Unit R1D Rockingham Gate Poplar Way
West Cabot Park Bristol BS11 0YW
Tel: 0808 123 69 69 Fax: 0117 9381 602
sales@safetyliftingear.com
Notified body, at which the European certification was
performed and which supervises
the production of the equipment:
APAVE SUDEUROPE SAS - BP 193 -
13322 MARSEILLE CEDEX 16 - FRANCE
SIZES
The harness is manufactured in two sizes:
- universal: M-XL
- extra large: XXL
Periodic inspections
The harness must be inspected at least once every 12 months from the date of first use.
Periodic inspections must only be carried out by a competent person who has the
knowledge and training required for personal protective equipment periodic inspections.
Depending upon the type and environment of work, inspections may be needed to be
carried out more frequently than once every 12 months.
Maximum lifespan of the equipment
The maximum lifespan of the harness is 10 years from the date of manufacture. This is
irrespective of shelf life and working life. The harness must be withdrawn from use
immediately and destroyed when it has been used to arrest a fall.
Advertisement
Table of Contents
Summary of Contents for GForce P-10
- Page 1 SIZES The harness is manufactured in two sizes: - universal: M-XL - extra large: XXL Periodic inspections The harness must be inspected at least once every 12 months from the date of first use. Periodic inspections must only be carried out by a competent person who has the knowledge and training required for personal protective equipment periodic inspections.
Need help?
Do you have a question about the P-10 and is the answer not in the manual?
Questions and answers