Thank you for purchasing the Schmécké Cigar Humidor Cooler. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
SETTING UP THE CIGAR COOLER 1. When choosing a location to store the cigar cooler, be aware of the following: a. Be sure that it is placed on a sturdy, level surface that is strong enough to support it when full. b.
MAINTAINING CIGAR HUMIDITY 1. Fill the humidity tray (small plastic reservoir) to about ¾ full with 100% distilled water. 2. Place the filled reservoir onto the bottom of the cigar cooler. 3. Regularly check the water level and refill as necessary. 4.
4. Place the bottle cap and the hygrometer 5. Wait at least 6 hours. inside the bag or container, then seal it. 6. Read the hygrometer without opening the bag or container. The environment inside this bag or container is now at 75% humidity. 7.
Frost or ice developed Restart the unit. inside the cigar Ambient temperature too low. cooler. SPECIFICATIONS SHMCC0251SS SHMCC0331SS SHMCC0501SS Power Supply 115 V / 60 Hz 115 V / 60 Hz 115 V / 60 Hz Rated Power...
Need help?
Do you have a question about the SHMCC0251SS and is the answer not in the manual?
Questions and answers