Advertisement
C-leg aDJUstaBle tUBe Footrest
Item Numbers 8664, 8665, 8666, 8667
Bracket
Left
Footrest Plate
Item Number 8668
Plate Support
Production Basics, Inc.
Massachusetts, USA
1303A866
A S S E M B L Y M A N U A L
Footrest Tube
U-Bolt Retainer Plate
800.318.2770
617.926.8100
A c c e s s o r ie s
P A R T S A n d h A R d W A R e
Footrest Tube
Brackets (2 pieces each)
Basic Bolts
Basic nuts
Allen Wrench
Other Items Needed (not included)
Tape Measure
Level
•
Note: Adjust bracket position to accommodate
operator and depth of station.
1.
Prepare brackets as shown. Adjust bracket according to
operator comfort and depth of workstation. Brackets are
LEFT and RIGHT specific.
2.
Attach footrest tube between the bracket assemblies
using a Basic Bolt.
3.
Insert a Basic Bolt into the mounting plate on the bracket
assembly and secure with a Basic nut turning one
revolution. Repeat for other bracket.
4.
Install bracket onto frame under the worksurface.
Measure or use a level to ensure brackets are at the
same height. Repeat for other bracket.
P A R T S A n d h A R d W A R e
Footrest Plate
Plate Support
U-Bolts
nuts
handles
U-Bolt Retainer Plate
•
Note: Footrest Plate must be installed on Tube
Footrest before tube is secured into position.
1.
Assemble Footrest Plate Bracket as shown.
2.
Slip Footrest Tube through holes in Footrest Plate and
the U-Bolts.
3.
Secure by inserting the handle into the weld nut on the
bracket.
4.
To adjust Footrest Plate placement, loosen or tighten
U-Bolt on underside of plate. To adjust angle, use
handles on the side.
5.
Attach footrest as directed (Adjustable Tube or RTW
Tube).
Fax: 617.926.8010
www.pbasics.com
Q U A n T I T y
1
2
10
4
1
Q U A n T I T y
1
1
2
4
2
2
1
Advertisement
