To Select Recording Bit Rate And Speed - LG MCT436 Owner's Manual

18 Operating
To select recording bit rate
and speed
1. Press R on the unit or X REC on the remote
control for longer than 3 seconds.
2. Use Y/U on the unit or Cc/vV
remote control to select the bit rate.
3. Press R on the unit or X REC on the remote
control again to select the recording speed.
4. Press Y/U on the unit or Cc/
vV on the remote control to select a
desired recording speed; (Only AUDIO CD)
X1 SPEED
- You can listen to music while recording it.
3
X2 SPEED
- You can just record the music fi le.
5. Press R on the unit or X REC on the remote
control to fi nish the setting.
MCT436-A0U-APERLLK-ENG.indd 18 MCT436-A0U-APERLLK-ENG.indd 18
,
Note
You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
During recording MP3/ WMA, there is no
sound.
When you stop recording during playback,
the fi le that has been recorded at that time
will be stored. (AUDIO CD Only)
Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete fi le may be made and not
deleted on PC.
If USB recording does not work, the
message like "NO USB", "ERROR", "FULL" or "NO
REC" is displayed on the display window.
Multi card reader device or External HDD
can not be used for USB recording.
A fi le is recorded by about 512 Mbyte when
you record for a long term.
When you stop recording during playback,
the fi le will not be stored.
You may not store more than 999 fi les.
It'll be stored as follows.
AUDIO CD MP3/ WMA
* : TUNER, AUX and the like.
The making of unauthorized copies of copy-
protected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal off ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
The other
source*
11. 07. 05 11. 07. 05 9:40 9:40