Advertisement

MCP-TDH6 User Guide
Version: E Release Date: 08/16/2017
P. 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MCP-TDH6 and is the answer not in the manual?

Questions and answers

Summary of Contents for MOVETEC MCP-TDH6

  • Page 1 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 P. 1...
  • Page 2 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 Dimensions P. 2...
  • Page 3 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 User Interface Guide A. Height Adjustment Buttons B. Memory Position Buttons C. Memory Setting Button D. Digital Display P. 3...
  • Page 4 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 Power Saving Function - Waking up the Control ◼ When no button has been pressed for 10 seconds, display goes off. Press any button to light up the display again. ◼ When no button has been pressed for 30 seconds, the system goes to <0.1W standby mode. Long press any button to wake the system up.
  • Page 5 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 Reset ◼ Simultaneously press ▲ and ▼ for 3 seconds. Continue pressing the buttons until both columns are in lowest position. When finish reset, the control box makes a beep and the buttons can be released.
  • Page 6 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 Presetting the Desk Starting Height ◼ The default starting height is 65cm. ◼ To adjust the starting height, press ▼ button to go to the lowest position of the desk. At the lowest position, continue pressing ▼...
  • Page 7 MCP-TDH6 User Guide Version: E Release Date: 08/16/2017 Memorize position S” ① Adjust the desk to the desired height, then press “ for 3-5 seconds. The digital display will flash for 5 seconds. ② Press to assign the desk's position to the respective button.

Table of Contents