1. Manuals
  2. Brands
  3. Themis Manuals
  4. Carrier boards
  5. 2P2 PMC
  6. User manual

Themis 2P2 PMC User Manual

Triple pmc, dual pmc, and dual pmc/xmc carrier boards / 6ru vme64 platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Themis 2P2 PMC User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2P2 PMC and is the answer not in the manual?

Questions and answers

Summary of Contents for Themis 2P2 PMC

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
  • Page 2 User Manual User Manual User User Manual Manual Triple PMC, Dual PMC, and Dual PMC/XMC Carrier Boards / 6RU VME64 Platform Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 4 PMC/XMC Carrier Board Manual Version 3.0— December 2009 Themis Computer—Americas and Pacific Rim Themis Computer—Rest of World 47200 Bayside Parkway 5 Rue Irene Joliot-Curie Fremont, CA 94538 38320 Eybens, France Phone (510) 252-0870 Phone +33 476 14 77 80 Fax (510) 490-5529 Fax +33 476 14 77 89 World Wide Web http://www.themis.com...
  • Page 5 Themis Computer assumes no responsibility for inaccuracies. Themis Computer retains the right to make changes to this publication at any time without prior notice. Themis Computer does not assume any liability arising from the application or use of this publication or the product(s) described herein.
  • Page 6 Version 3.0 ................... December 2009 • Added chapter 2—entitled “2P2 PMC/XMC Carrier Board” to consolidate the 2P2 PMC/XMC Carrier Board with the 2P2 and 2P3 PMC Carrier Boards into one manual. • Added board weights to the appropriate specification tables.
  • Page 7 PMC/XMC Carrier Board Manual Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 8: Table Of Contents

    1.1 2P2 PMC Carrier Board Overview ................ 1-1 1.2 Connectors ......................1-4 1.2.1 2P2 PMC Carrier Board VME P1 Connector ..........1-4 1.2.2 2P2 PMC Carrier Board VME P2 Connector ..........1-6 1.2.3 2P2 PMC Module Slot User I/O ..............1-8 1.2.3.1 2P2 PMC Module Slot Pinouts ...........
  • Page 9 2.4 Switches ....................... 2-31 2.5 Jumper Pins ......................2-32 2.6 Resistor Pads ......................2-32 2.7 2P2 PMC/XMC Front Panel and Board Diagrams ..........2-32 2.8 2P2 PMC/XMC Carrier Board Specifications ............. 2-35 2.8.1 Environmental and Compliance Requirements ........2-35 2.9 Estimated Power Requirements ................2-36 3.
  • Page 10 2P2 PMC Carrier Board Solder-Bead Locations (Bottom Side) ....1-22 Figure 1-10 2P2 PMC Carrier Board Front Panel ............. 1-25 Figure 1-11 2P2 PMC Carrier Board Component and Connector Diagram (Top Side) ... 1-26 Figure 2-1 2P2 PMC/XMC Carrier Board ................ 2-1 Figure 2-2 2P2 PMC/XMC Carrier Board Block Diagram ..........
  • Page 11 PMC/XMC Carrier Board Manual Figure 2-16 2P2 PMC/XMC Carrier Board Component and Connector Diagram ... 2-34 Figure 3-1 2P3 PMC Carrier Board................... 3-1 Figure 3-2 2P3 PMC Carrier Board Block Diagram ............3-2 Figure 3-3 2P3 PMC Carrier Board VME P1 Connector Orientation....... 3-4 Figure 3-4 2P3 PMC Board VME P2 Connector Pin Orientation........
  • Page 12 Table 1-2 2P2 PMC Carrier Board VME P2 Pinout ............1-7 Table 1-3 2P2 PMC Carrier Slot 1 with 64 Bits of User I/O ......... 1-10 Table 1-4 2P2 PMC Carrier Slot 1 with 32 Bits of User I/O ......... 1-11 Table 1-5 2P2 PMC Carrier Slot 2 with 32 Bits of User I/O .........
  • Page 13 2P2 PMC/XMC Audio Input/Output Settings ..........2-26 Table 2-14 2P2 PMC/XMC Solder-Bead Configurations..........2-29 Table 2-13 2P2 PMC/XMC VME P2 Connector SB2801–SB2832 Configuration ..2-30 Table 2-15 SW2 and SW3 Setting Definitions ..............2-31 Table 2-16 Environmental Requirements ................ 2-35 Table 2-17 Compliance Requirements ................

  • Page 14: Overview

    Thank you for purchasing the Themis PMC/XMC Carrier Board. The PMC/XMC Car- rier Board is an add-on expansion board for most Themis VME single-board computers, and supports two (on the 2P2 model) or three (on the 2P3 model) PMC and XMC (if sup- ported) plug-in modules.
  • Page 15 √ √ TP32 a—The 2P2 PMC/XMC Carrier Board must be specifically ordered for the product to which it will be attached (see Table 2). b—The TA64 and TPPC64 do not support PCI Express (XMC) signaling. Table 2. 2P2 PMC/XMC Carrier Board Part Numbers...
  • Page 16 1). For more information on these handles, refer to the Note and Figure A-2 on page A-3. All multi-board systems are put together by Themis at the factory. The boards are designed to be installed in a specific order (see the hardware manual for your sys- tem;...
  • Page 17 Themis at the factory only. Warning: You specify solder-bead preferences when you order your unit Since, the solder beads are set by Themis at the factory, DO NOT ATTEMPT TO ALTER SOLDER-BEAD CONFIGURATIONS! Attempting to alter a solder-bead config- uration could seriously damage the carrier board.
  • Page 18 5 volts will only accept 5V (or universal) modules. Intended Audience This manual is written for Themis customers who have purchased a Themis Single- Board Computer (e.g., USPIIe-Gb, USPIIIi, TA64, et al.), and wish to add carrier- board capability.
  • Page 19 To reduce the risk, follow the instructions accompanying this sym- bol. A “sidebar” adds detail to the section within which it is placed, Sidebar: but is not absolutely vital to the description or procedure. Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 20 You are not required to return the registra- tion card to activate your product warranty; however, by registering your carrier board, Themis Computer will be better able to provide you with timely information updates and product-enhancement notifications.
  • Page 21 Reader Comment Card at the end of this manual. Please include the document part number (112826-020) in the subject line of your email. xviii Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 22: P2 Pmc Carrier Board

    Modules) and on-board Audio/Ethernet/Serial-I/O features. Figure 1-2 on page 1-2 diagrams the functions of the 2P2 PMC Carrier Board. The 2P2 PMC Carrier Board works in conjunction with the following Themis systems: USPIIe, USPIIe-USB, USPIIe-Gb, USPIIIi, and USPIIIi-OPT. Figure 1-1. 2P2 PMC Carrier Board Themis Computer Artisan Technology Group - Quality Instrumentation ...

  • Page 23: Figure 1-2 2P2 Pmc Carrier Board Block Diagram

    64 bits from PMC 1 or 32 bits from PMC 1 and 32 bits from PMC 2. Figure 1-2. 2P2 PMC Carrier Board Block Diagram Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 24 1—2P2 PMC Carrier Board 2P2 PMC Carrier Board Overview User I/O on the 2P2 PMC Carrier Board can be accessed from both the front-panel and paddle-board connectors. In some instances, accessing a signal from one of these access sources prevents the signal from being accessed from the second source. For example, if TTYE is routed to the VME P2 backplane, then TTYE cannot be accessed from the front panel.

  • Page 25: Connectors

    The VME P1 connector provides daisy-chaining of IACK and BG signals. There is no need to jumper those signals manually for the position occupied by the 2P2 PMC Carrier Board. See Table 1-1 on page 1-5 for the VME P1 connector pinouts.

  • Page 26: Table 1-1 2P2 Pmc Carrier Board Vme P1 Pinouts

    1—2P2 PMC Carrier Board Connectors Table 1-1. 2P2 PMC Carrier Board VME P1 Pinouts Row A Row B Row C Signal Name Signal Name Signal Name DAISY_CHAIN_BGIN_L<0> DAISY_CHAIN_BGOUT_L<0> DAISY_CHAIN_BGIN_L<1> DAISY_CHAIN_BGOUT_L<1> DAISY_CHAIN_BGIN_L<2> DAISY_CHAIN_BGOUT_L<2> DAISY_CHAIN_BGIN_L<3> DAISY_CHAIN_BGOUT_L<3> DAISY_CHAIN_IACKIN_L DAISY_CHAIN_IACKOUT_L -12V +12V Themis Computer...

  • Page 27: 2P2 Pmc Carrier Board Vme P2 Connector

    1.2.2 2P2 PMC Carrier Board VME P2 Connector The VME P2 connector of the 2P2 PMC Carrier Board transmits 64 user-defined signals through rows A and C, all from a combination of signals (solder-bead switchable) from PMC Module slots 1 and 2, Serial Ports E (TTY E) and F (TTY F),...

  • Page 28: Table 1-2 2P2 Pmc Carrier Board Vme P2 Pinout

    1—2P2 PMC Carrier Board Connectors Table 1-2. 2P2 PMC Carrier Board VME P2 Pinout Row A Row B Row C Signal Name Signal Name Signal Name User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable...

  • Page 29: 2P2 Pmc Module Slot User I/O

    This section provides the pinouts of the 64 PMC User I/O signals that can be brought from PMC Module Slot 1 and Slot 2 to the VME P2 connector of the 2P2 PMC Carrier Board. Figure 1-5 shows the pin orientation of the 2P2 PMC Module Slot connector used to install PMC Modules onto the top side of the circuit board (USPIIe, USPIIe-USB, USPIIe-Gb, USPIIIi, or USPIIIi-OPT).
  • Page 30 1—2P2 PMC Carrier Board Connectors As seen in Table 1-11 on page 1-20, three solder-bead-selectable configurations are possible: • 64 user signals from PMC Slot 1 (through J1004; see Table 1-3, page 1-10), and none from PMC Module Slot 2.

  • Page 31: Table 1-3 2P2 Pmc Carrier Slot 1 With 64 Bits Of User I/O

    PMC/XMC Carrier Board Manual Table 1-3. 2P2 PMC Carrier Slot 1 with 64 Bits of User I/O PMC Pin (J1004) VME P2 Signal PMC Pin (J1004) VME P2 Signal PMC IO C1 PMC IO A1 PMC IO C2 PMC IO A2...

  • Page 32: Table 1-4 2P2 Pmc Carrier Slot 1 With 32 Bits Of User I/O

    1—2P2 PMC Carrier Board Connectors Table 1-4. 2P2 PMC Carrier Slot 1 with 32 Bits of User I/O PMC Pin (J1004) VME P2 Signal PMC Pin (J1004) VME P2 Signal PMC IO C17 PMC IO A17 PMC IO C18 PMC IO A18...

  • Page 33: Table 1-5 2P2 Pmc Carrier Slot 2 With 32 Bits Of User I/O

    PMC/XMC Carrier Board Manual Table 1-5. 2P2 PMC Carrier Slot 2 with 32 Bits of User I/O PMC Pin (J1104) VME P2 Signal PMC Pin (J1104) VME P2 Signal PMC IO C1 PMC IO A1 PMC IO C2 PMC IO A2...

  • Page 34: Table 1-6 2P2 Pmc Carrier Slot 3 With 0 Bits Of User I/O

    1—2P2 PMC Carrier Board Connectors Table 1-6. 2P2 PMC Carrier Slot 3 with 0 Bits of User I/O PMC Pin (J1204) VME P2 Signal PMC Pin (J1204) VME P2 Signal Not available Not available Not available Not available Not available...

  • Page 35: Serial Ports Ttye And Ttyf (Rs232)

    There are two serial port connections available from the front panel of the 2P2 PMC Carrier Board or from the 2P2 PMC Carrier Board VME P2 bus. They are Serial Port E (TTYE—RS232) and Serial Port F (TTYF—RS232). These serial ports are sup- ported by the Siemens SAB82532 DUART serial controller, located on the 2P2 PMC Carrier Board.

  • Page 36: Ethernet Port B

    Connectors 1.2.5 Ethernet Port B The 2P2 PMC Carrier Board features an RJ45 port on the Front Panel for 10/100 Base-T Ethernet connection. In units where only the Baseboard is present, a single network connection (Ethernet A) is available through the RJ45 connector. With the addition of a 2P2 PMC Carrier Board, a second network connection (Ethernet B) is available through the carrier board front panel.

  • Page 37: Rotary Switch

    Note: OBP records the value of the user-defined Rotary Switch as an OBP envi- ronment variable called themis-switch-value. The default value for this variable is 255 (0xff), which is assigned if the 2P2 PMC Carrier Board is not con- nected. If the board is connected, a value from 0 through 15 is assigned.

  • Page 38: 2P2 Pmc Carrier Board Solder Beads

    Figure 1-8. Dual Stereo Audio Connector 2P2 PMC Carrier Board Solder Beads Solder beads are found only on the bottom side of the 2P2 PMC Carrier Board and are described in Table 1-9. In Table 1-9, if no pad number is given, only 2 solder pads exist. If there are 3 or more solder pads, the two pads listed are shorted together.

  • Page 39: Table 1-9 2P2 Pmc Carrier Board Solder-Bead Settings (Bottom Side)

    Short 1–2 connected to the Baseboard SB0901 Required when the 2P2 PMC Carrier Board (in the third VME slot) is directly con- Short 2–3 nected to the Graphics Board or the PMC Carrier Board in the second VME slot Short 1–2...

  • Page 40: Table 1-10 2P2 Pmc Audio Input/Output Settings

    1—2P2 PMC Carrier Board 2P2 PMC Carrier Board Solder Beads Table 1-9. 2P2 PMC Carrier Board Solder-Bead Settings (Bottom Side) (Continued) Solder Setting Description Bead Short SB2834 PCB Revision settings indicator (see Table 1-13, page 1-20) Open Short SB2835 VME P2 connector pinout configuration (see Table 1-11, page 1-20)

  • Page 41: Table 1-11 Vme P2 Connector Configuration

    Short Short Short Short Short Open Short Open Short Short Open Open Open Short Short Open Short Open Open Open Short Open Open Open 1-20 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 42: Table 1-14 Vme P2 Pin Signal Interpretation

    1—2P2 PMC Carrier Board 2P2 PMC Carrier Board Solder Beads In Table 1-15 on page 1-23, VME P2 pin signals are interpreted as follows: Table 1-14. VME P2 Pin Signal Interpretation Signal Interpretation PMC1_IOn The nth pin of PMC Module slot 1...

  • Page 43: Figure 1-9 2P2 Pmc Carrier Board Solder-Bead Locations (Bottom Side)

    = May be set open or short as per manufacturing. SB2835 SB2833 SB2839 SB2837 Figure 1-9. 2P2 PMC Carrier Board Solder-Bead Locations (Bottom Side) 1-22 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 44: Table 1-15 Pmc Carrier Board Vme P2 Connector Sb2801-Sb2832 Configuration

    1—2P2 PMC Carrier Board 2P2 PMC Carrier Board Solder Beads Table 1-15. PMC Carrier Board VME P2 Connector SB2801–SB2832 Configuration VME P2 Connector Row A VME P2 Connector Row C Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal with SB 1–4...

  • Page 45: Jumper Pins

    This section’s front panel and board diagrams provide component and connector information at a glance. Figure 1-10 on page 1-25 shows the 2P2 PMC front panel. Figure 1-11 on page 1-26 shows the 2P2 PMC components and connectors. 1-24 Themis Computer...

  • Page 46: Figure 1-10 2P2 Pmc Carrier Board Front Panel

    PMC Module 1 Line In/Out and Mic/Headphones are switchable through on-board solder beads. See Table 1-10. Figure 1-10. 2P2 PMC Carrier Board Front Panel 1-25 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 47: Figure 1-11 2P2 Pmc Carrier Board Component And Connector Diagram (Top Side)

    P0501 connects to the Baseboard; P0602 is PMC Module Outline not presently used. Figure 1-11. 2P2 PMC Carrier Board Component and Connector Diagram (Top Side) 1-26 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 48: 2P2 Pmc Carrier Board Specifications

    1—2P2 PMC Carrier Board 2P2 PMC Carrier Board Specifications 2P2 PMC Carrier Board Specifications 1.6.1 Environmental and Compliance Requirements The 2P2 PMC Carrier Board meets the environmental and compliance regulatory requirements defined in Tables 1-16 and 1-17. Table 1-16. Environmental Requirements Parameter Operating...

  • Page 49: P2 Pmc/Xmc Carrier Board

    PMC/XMC Carrier Board Manual 1-28 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 50: 2P2 Pmc/Xmc Carrier Board Overview

    PCI Express per PMC/XMC module. (See Table 1 on page xii for a list of processor boards that support XMC modules.) Figure 2-2 on page 2-2 diagrams the functions of the 2P2 PMC/XMC Carrier Board. The 2P2 PMC/XMC Carrier Board works in conjunction with the following Themis systems: TC2D64, TA64, TPPC64, and TP32.

  • Page 51: Figure 2-2 2P2 Pmc/Xmc Carrier Board Block Diagram

    EEPROM 3256XL) AT24C512 Input Power Rotary Switch I2C Master Misc. I/O PCA9564PW I2C/SMBus EEPROM B-Scan Chain AT24C04 Figure 2-2. 2P2 PMC/XMC Carrier Board Block Diagram Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 52: Figure 2-3 The 2P2 Pmc/Xmc Module Slot Connectors (Top And Bottom Views)

    114-pin Plug Connector (Mictor) Not installed for TA64 PCI Express 3.3-volt Key 5-volt Key Bottom View Figure 2-3. The 2P2 PMC/XMC Module Slot Connectors (Top and Bottom Views) Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 53: Pci To Pci Bridge

    PMC/XMC Carrier Board Manual User I/O on the 2P2 PMC/XMC Carrier Board can be accessed from both the front-panel and paddle-board connectors. In some instances, accessing a signal from one of these access sources prevents the signal from being accessed from the second source. For exam- ple, if TTYE is routed to the VME P2 backplane, then TTYE cannot be accessed from the front panel.

  • Page 54: The Pci Express Switch

    2—2P2 PMC/XMC Carrier Board 2P2 PMC/XMC Carrier Board Overview The 2P2 PMC/XMC allows you to configure both the primary and secondary bus interfaces for one of four possible modes: 5V/33MHz, 3.3V/33MHz, 5V/66MHz, or 3.3V/66MHz. You configure the mode by setting solder beads SB87 and SB88 (volt- age setting) and SB69 and SB70 (frequency setting) (see Table 2-9 on page 2-20).

  • Page 55: Connectors

    The VME P1 connector provides daisy-chaining of IACK and BG signals. There is no need to jumper those signals manually for the position occupied by the 2P2 PMC/XMC Carrier Board. See Table 2-1 on page 2-7 for the VME P1 connector pinouts.

  • Page 56: Table 2-1 2P2 Pmc/Xmc Carrier Board Vme P1 Pinouts

    2—2P2 PMC/XMC Carrier Board Connectors Table 2-1. 2P2 PMC/XMC Carrier Board VME P1 Pinouts Row A Row B Row C Signal Name Signal Name Signal Name DAISY_CHAIN_BGIN_L<0> DAISY_CHAIN_BGOUT_L<0> DAISY_CHAIN_BGIN_L<1> DAISY_CHAIN_BGOUT_L<1> DAISY_CHAIN_BGIN_L<2> DAISY_CHAIN_BGOUT_L<2> DAISY_CHAIN_BGIN_L<3> DAISY_CHAIN_BGOUT_L<3> DAISY_CHAIN_IACKIN_L DAISY_CHAIN_IACKOUT_L -12V +12V Themis Computer...

  • Page 57: 2P2 Pmc/Xmc Carrier Board Vme P2 Connector

    2.2.2 2P2 PMC/XMC Carrier Board VME P2 Connector The VME P2 connector of the 2P2 PMC/XMC Carrier Board transmits 64 user- defined signals through rows A and C, all from a combination of signals (solder- bead switchable) from PMC Module slots 1 and 2, Serial Ports E (TTY E) and F...

  • Page 58: Table 2-2 2P2 Pmc/Xmc Carrier Board Vme P2 Pinouts

    2—2P2 PMC/XMC Carrier Board Connectors Table 2-2. 2P2 PMC/XMC Carrier Board VME P2 Pinouts Row A Row B Row C Signal Name Signal Name Signal Name User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable User-switchable...

  • Page 59: 2P2 Pmc/Xmc Module Slots

    2.2.3 2P2 PMC/XMC Module Slots The 2P2 PMC/XMC Carrier Board supports a combination of two PMC Module slots (to support vendor-specific, 32/64-bit, 66-MHz, PMC expansion Modules) and two XMC Module slots. Each XMC module slot provides x4 PCI Express. (See Table 1 on page xii for a list of processor boards that support XMC modules.)

  • Page 60: Figure 2-7 Pmc Module Slot Connector Pin Orientation

    2—2P2 PMC/XMC Carrier Board Connectors Figure 2-7 shows the pin orientation of the PMC Module Slot connector used to install 2P2 PMC/XMC Modules onto the top side of the circuit board (TA64, TPPC64, or TP32). • Connector Type: 64-Pin, Female, 10mm, Dual Row •...

  • Page 61: Table 2-3 Pmc Carrier Slot 1 With 64 Bits Of User I/O

    VME_P2 C27 VME_P2 A27 VME_P2 C28 VME_P2 A28 VME_P2 C29 VME_P2 A29 VME_P2 C30 VME_P2 A30 VME_P2 C31 VME_P2 A31 VME_P2 C32 VME_P2 A32 2-12 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 62: Table 2-4 Pmc Carrier Slot 1 With 32 Bits Of User I/O

    2—2P2 PMC/XMC Carrier Board Connectors Table 2-4. PMC Carrier Slot 1 with 32 Bits of User I/O PMC Pin (J14_PMC1) VME P2 Signal PMC Pin (J14_PMC1) VME P2 Signal VME_P2 C17 VME_P2 A17 VME_P2 C18 VME_P2 A18 VME_P2 C19 VME_P2 A19...

  • Page 63: Table 2-5 Pmc Carrier Slot 2 With 32 Bits Of User I/O

    VME_P2 C11 VME_P2 A11 VME_P2 C12 VME_P2 A12 VME_P2 C13 VME_P2 A13 VME_P2 C14 VME_P2 A14 VME_P2 C15 VME_P2 A15 VME_P2 C16 VME_P2 A16 2-14 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 64: 2.2.3.2 Xmc Connectors

    Connectors 2.2.3.2 XMC Connectors Each PMC/XMC Module Slot on the 2P2 PMC/XMC Carrier Board provides a single XMC connector. The XMC connector provide the interface from the baseboard to the PMC slots (see Section 2.1.2 on page 2-5 for more information). The XMC connector sup- ports up to 8 PCI Express links;...

  • Page 65: Table 2-6 Xmc P15 Connector Pinouts

    VPWR MSDA PER0p4 PER0n4 PER0p5 PER0n5 VPWR MVMRO MSCL‘ PER0p6 PER0n6 PER0p7 PER0n7 REFCLK+0 REFCLK-0 WAKE# ROOT0# a—Non-operational on the 2P2 PMC/XMC Carrier Board. 2-16 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 66: Serial Ports E And F (Rs232)

    2.2.4 Serial Ports E and F (RS232) There are two serial ports available on the 2P2 PMC/XMC Carrier board that may be routed to the front panel or the VME P2 connector—Serial Port E (TTYE—RS232) and Serial Port F (TTYF—RS232). These serial ports are supported by the Siemens EXAR XR16L2551 DUART serial controller, located on the 2P2 PMC/XMC Car- rier Board.

  • Page 67: Gigabit Ethernet Port B

    2.2.5 Gigabit Ethernet Port B The 2P2 PMC/XMC Carrier Board features a Gigabit Ethernet connection on its front panel. The Ethernet port is an RJ45 (10-pin; 8-pin external) GBE connector with two embedded LEDs (see Figure 2-10 and Table 2-8) supporting 10/100/1000 Base-T transmission.

  • Page 68: Rotary Switch

    2.2.6 Rotary Switch The 2P2 PMC/XMC Carrier Board provides a 16-position Rotary Switch that is connected to the Coolrunner Complex Programmable Logic Device (CPLD). This switch allows you to change the switch position from the PMC Carrier Board front panel. The 16 positions correspond to 16 user-defined meanings.

  • Page 69: 2P2 Pmc/Xmc Carrier Board Solder Beads

    PMC/XMC Carrier Board Manual 2P2 PMC/XMC Carrier Board Solder Beads Solder beads are found on both the top side and bottom side of the 2P2 PMC/XMC Carrier Board and are described in Table 2-9. In Table 2-9, if no pad number is given, only 2 solder pads exist. If there are 3 or more solder pads, the two pads listed are shorted together.
  • Page 70 2—2P2 PMC/XMC Carrier Board 2P2 PMC/XMC Carrier Board Solder Beads Table 2-9. 2P2 PMC/XMC Carrier Board Solder-Bead Settings (Continued) Solder Setting Description Bead Short 1–2 SB41 Short 2–3 Short 1–2 SB42 Audio source selection Short 2–3 Short 1–2 Note: Short 1–2 = Route audio to Baseboard PCI connector.
  • Page 71 PMC/XMC Carrier Board Manual Table 2-9. 2P2 PMC/XMC Carrier Board Solder-Bead Settings (Continued) Solder Setting Description Bead Open SB72 Short Open SB73 XMC2 global address (I2C channel)—GA[2:0] = 110 (open/open/short) Short Open SB74 Short Short 1–2 SB75 Short 2–3 XMC2 JTAG = Bypass Short 1–2...
  • Page 72 2—2P2 PMC/XMC Carrier Board 2P2 PMC/XMC Carrier Board Solder Beads Table 2-9. 2P2 PMC/XMC Carrier Board Solder-Bead Settings (Continued) Solder Setting Description Bead Short 1–2 SB87 Short 2–3 PCI bridge primary and secondary VIO = 5.0V (not 3.3V) Short 1–2 SB88 Short 2–3...
  • Page 73 Short 1–2 SB112 PCI bridge secondary resister VIO = pulled to 3.3V Short 2–3 Open SB113 Short Prevents 2P2 PMC/XMC Carrier Board from powering up until chassis power is valid Open SB114 Short Open Use crystal for audio circuit SB115...
  • Page 74 2—2P2 PMC/XMC Carrier Board 2P2 PMC/XMC Carrier Board Solder Beads Table 2-9. 2P2 PMC/XMC Carrier Board Solder-Bead Settings (Continued) Solder Setting Description Bead Open SB117 Short Open SB118 Short Open SB119 Short Open SB120 Short XMC2 VPWR selection = +5V...

  • Page 75: Table 2-11 Vme P2 Connector Configuration

    PMC/XMC Carrier Board Manual Table 2-9. 2P2 PMC/XMC Carrier Board Solder-Bead Settings (Continued) Solder Setting Description Bead Open SB133 Factory use only Short a—Shading indicates the solder bead is located on the bottom side of the board; no shading indicates the top side of the board.

  • Page 76: Figure 2-12 2P2 Pmc/Xmc Carrier Board Solder-Bead, Jumper-Pin, And Switch Locations (Top Side)

    SB95 SB98 SB42 SB43 SB41 SB94 SB96 SB99 SB44 SB114 SB45 Figure 2-12. 2P2 PMC/XMC Carrier Board Solder-Bead, Jumper-Pin, and Switch Locations (Top Side) 2-27 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 77: Figure 2-13 2P2 Pmc/Xmc Carrier Board Solder-Bead Locations (Bottom Side)

    SB85 SB84 SB91 SB65 SB68 through SB32 SB115 Short 2--4 SB32 SB31 Bottom Side Figure 2-13. 2P2 PMC/XMC Carrier Board Solder-Bead Locations (Bottom Side) 2-28 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 78: Table 2-14 2P2 Pmc/Xmc Solder-Bead Configurations

    2—2P2 PMC/XMC Carrier Board 2P2 PMC/XMC Carrier Board Solder Beads Table 2-14. 2P2 PMC/XMC Solder-Bead Configurations Carrier PMC1 PMC2 Connector 2P2 Carrier I/O Board Jn4 I/O Jn4 I/O Pins Solder Bead Pin 4 Pin 1 Pin 2 Pin 3 PMC1_IO2...

  • Page 79: Table 2-13 2P2 Pmc/Xmc Vme P2 Connector Sb2801-Sb2832 Configuration

    PMC/XMC Carrier Board Manual Table 2-13. 2P2 PMC/XMC VME P2 Connector SB2801–SB2832 Configuration VME P2 Connector Row A VME P2 Connector Row C Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal Pin Signal with SB 1–4 with SB 2–4 with SB 3–4...

  • Page 80: Switches

    2—2P2 PMC/XMC Carrier Board Switches The bold lines in Table 2-13 outline the various functions available from the VME P2 connector according to the 2P2 PMC/XMC Carrier Board solder-bead configura- tion, namely: • 2P2 PMC/XMC Module slot 1 • 2P2 PMC/XMC Module slot 2 •...

  • Page 81: Jumper Pins

    Jumper Pins The 2P2 PMC/XMC Carrier Board has a single jumper-pin setting—the 2-pin JP355—on the top side of the board that is used for Themis testing purposes only (see Figure 2-12, page 2-27). Caution: Make sure that the JP355 jumper pin is set to jumper OFF (open). Not setting the JP355 correctly will result in improper operation of the board.

  • Page 82: Figure 2-15 2P2 Pmc/Xmc Carrier Board Front Panel

    PMC Module 1 Line In/Out and Mic/Headphones are switchable through on-board solder beads. See Table 2-11. Figure 2-15. 2P2 PMC/XMC Carrier Board Front Panel 2-33 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 83: Figure 2-16 2P2 Pmc/Xmc Carrier Board Component And Connector Diagram

    Module Lock- out Key Top Side P_BB1 connects to the Baseboard XMC Module Outline Figure 2-16. 2P2 PMC/XMC Carrier Board Component and Connector Diagram 2-34 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 84: 2P2 Pmc/Xmc Carrier Board Specifications

    2P2 PMC/XMC Carrier Board Specifications 2P2 PMC/XMC Carrier Board Specifications 2.8.1 Environmental and Compliance Requirements The 2P2 PMC/XMC Carrier Board meets the environmental and compliance regula- tory requirements defined in Tables 2-16 and 2-17. Table 2-16. Environmental Requirements Parameter Operating...

  • Page 85: Estimated Power Requirements

    PMC/XMC Carrier Board Manual Estimated Power Requirements Table 2-18 gives the estimated power requirements for the 2P2 PMC/XMC Carrier Board. Table 2-18. Estimated Power Requirements Description Specification Configurable to 3.0V, 3.3V and 3.6V, using Digital Logic Voltage (nominally 3.3V) resistors to test low, nominal and high volt-...

  • Page 86: P3 Pmc Carrier Board

    Modules). The 2P3 supports front panel I/O from the PMC modules only. Figure 3-2 on page 3-2 diagrams the functions of the 2P3 PMC Carrier Board. The 2P3 PMC Carrier Board works in conjunction with the following Themis systems: USPIIe, USPIIe-USB, USPIIe-Gb, USPIIIi, USPIIIi-OPT, TC2D64, TA64, TPPC64, and TP32.

  • Page 87: Figure 3-2 2P3 Pmc Carrier Board Block Diagram

    64 bits from PMC 1 or 32 bits from PMC 1 and 32 bits from PMC 2. Figure 3-2. 2P3 PMC Carrier Board Block Diagram Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 88 User I/O on the 2P3 PMC Carrier Board can be accessed from the VME P2 connector. Note: The available paddle boards cannot be used for VME P2 connection. You will need to provide your own connectivity, or call Themis Customer Support for a cost estimate on building a custom Paddle Board.

  • Page 89: Connectors

    VME P1 connector. (Top View) PCB Edge Row A Row B Row C Figure 3-3. 2P3 PMC Carrier Board VME P1 Connector Orientation Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 90: Table 3-1 2P3 Pmc Carrier Board Vme P1 Pinouts

    Table 3-1. 2P3 PMC Carrier Board VME P1 Pinouts Row A Row B Row C Signal Name Signal Name Signal Name DAISY_CHAIN_BGIN_L<0> DAISY_CHAIN_BGOUT_L<0> DAISY_CHAIN_BGIN_L<1> DAISY_CHAIN_BGOUT_L<1> DAISY_CHAIN_BGIN_L<2> DAISY_CHAIN_BGOUT_L<2> DAISY_CHAIN_BGIN_L<3> DAISY_CHAIN_BGOUT_L<3> DAISY_CHAIN_IACKIN_L DAISY_CHAIN_IACKOUT_L -12V +12V Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 91: 2P3 Pmc Carrier Board Vme P2 Connector

    VME P2 connector. (Top View) PCB Edge Row A Row B Row C Figure 3-4. 2P3 PMC Board VME P2 Connector Pin Orientation Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 92: Table 3-2 2P3 Pmc Carrier Board Vme P2 Pinout

    PMC1_IO45 PMC1_IO48 PMC1_IO47 PMC1_IO50 PMC1_IO49 PMC1_IO52 PMC1_IO51 PMC1_IO54 PMC1_IO53 PMC1_IO56 PMC1_IO55 PMC1_IO58 PMC1_IO57 PMC1_IO60 PMC1_IO59 PMC1_IO62 PMC1_IO61 PMC1_IO64 PMC1_IO63 a—See Table 3-12 on page 3-20. Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 93: 2P3 Pmc Module Slot User I/O

    USPIIe-Gb, USPIIIi, or USPIIIi-OPT). • Connector Type: 64 Pin, Female, 10mm, Dual Row • Manufacturer; Part Number: AMP; 120528-1 Figure 3-5. 2P3 PMC Module Slot Connector Pin Orientation Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 94 32 user signals from PMC Module Slot 1 (through J1004; see Table 3-4, page 3-11) and 32 user signals from PMC Module Slot 2 (through J1104; see Table 3-5, page 3-12). This is the default configuration. Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 95: Table 3-3 2P3 Pmc Carrier Slot 1 With 64 Bits Of User I/O

    PMC IO C29 PMC IO A29 PMC IO C30 PMC IO A30 PMC IO C31 PMC IO A31 PMC IO C32 PMC IO A32 3-10 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 96: Table 3-4 2P3 Pmc Carrier Slot 1 With 32 Bits Of User I/O

    PMC IO C29 PMC IO A29 PMC IO C30 PMC IO A30 PMC IO C31 PMC IO A31 PMC IO C32 PMC IO A32 3-11 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 97: Table 3-5 2P3 Pmc Carrier Slot 2 With 32 Bits Of User I/O

    PMC IO C13 PMC IO A13 PMC IO C14 PMC IO A14 PMC IO C15 PMC IO A15 PMC IO C16 PMC IO A16 3-12 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 98: Table 3-6 2P3 Pmc Carrier Slot 3 With 0 Bits Of User I/O

    Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available 3-13 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 99: 2P3 Pmc Carrier Board Solder Beads

    Remember that pin 1 is indicated on the board by a dot and/or a thick bar line. Caution: When dealing with a 3- or 4-pin solder-bead switch, a solder bead will short only one set of pins. If a solder bead shorts more than 2 pins, call Themis Customer Support. 3-14 Themis Computer...

  • Page 100: Table 3-7 2P3 Pmc Carrier Board Solder-Bead Settings (Both Sides)

    SB2837 PCB Revision settings indicator (see Table 3-10, page 3-17) Open Note: Footnotes are described at the end of Table 3-7 on page 3-16. 3-15 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 101: Table 3-8 Vme P2 Connector Configuration

    PMC 1 (16 pins) and PMC 2 (16 pins) Short 3–4 Open Short a—See Table 3-11, page 3-18, and Table 3-12, page 3-20 for details. 3-16 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 102: Table 3-9 2P3 Pmc Carrier Board Selection Settings

    Table 3-9. 2P3 PMC Carrier Board Selection Settings SB2839 SB2840 SB2833 2 PMCs in first I/O slot (VME card n) Reserved for 2P2 PMC Carrier Board. 3 PMCs in first I/O slot (VME card n) Short Short Open 2 PMCs in second I/O slot (VME card n+1) Reserved for 2P2 PMC Carrier Board.

  • Page 103: Table 3-11 Vme P2 Pin Signal Interpretation

    • Serial Port F (Not applicable to 2P3 PMC Carrier Board) • User Switch (Not applicable to 2P3 PMC Carrier Board) • I C-bus signals (Not applicable to 2P3 PMC Carrier Board) 3-18 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 104: Figure 3-6 2P3 Pmc Carrier Board Solder-Bead Locations (Bottom Side)

    = May be set open or short as per manufacturing. SB2835 SB2833 SB2839 SB2837 Figure 3-6. 2P3 PMC Carrier Board Solder-Bead Locations (Bottom Side) 3-19 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 105: Table 3-12 2P3 Pmc Carrier Board Vme P2 Connector Sb2801-Sb2832 Configuration

    PMC1_IO47 PMC1_IO50 PMC1_IO49 PMC1_IO52 PMC1_IO51 PMC1_IO54 PMC1_IO53 PMC1_IO56 PMC1_IO55 PMC1_IO58 PMC1_IO57 Note: Footnotes are described at the end of Table 3-12 on page 3-21. 3-20 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 106: Jumper Pins

    Figure 3-7 on page 3-22 shows the 2P3 PMC front panel. Figure 3-8 on page 3-23 shows the 2P3 PMC components and connectors. 3-21 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 107: Figure 3-7 2P3 Pmc Carrier Board Front Panel

    PMC/XMC Carrier Board Manual PMC Module 3 PMC Module 2 PMC Module 1 Figure 3-7. 2P3 PMC Carrier Board Front Panel 3-22 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 108: Figure 3-8 2P3 Pmc Carrier Board Component And Connector Diagram

    Component Side P0501 connects to the Baseboard; P0602 is PMC Module Outline not presently used. Figure 3-8. 2P3 PMC Carrier Board Component and Connector Diagram 3-23 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 109: 2P3 Pmc Carrier Board Specifications

    300 LFM min. Table 3-14. Compliance Requirements Parameter Specifications Radiated and Conducted Emissions FCC Class A PCB FAB Material FR-408 or equivalent PCB FAB Thickness 0.062” 3-24 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 110: Appendix A. Disassembling And Reassembling Boards

    Note: This procedure applies to Themis’s USPIIe Family of Computers only: USPIIe, USPIIe-USB, and USPIIe-Gb. The procedure will be similar for others boards; for example, the 2P2 PMC/XMC Carrier Board. Before you can begin these procedures, you will need the following: •...

  • Page 111: Disassembling The Boards

    Once these screws have been removed, the only mechanism holding the boards together is a high-density connector which routes PCI bus signals between the boards. Figure A-1. Seven Screw Locations Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 112: Figure A-2 Remove 3 Screws Securing Injector/Ejector Handles

    A—Disassembling and Reassembling Boards (Themis USPIIe Family of Computers) Disassembling the Boards Note: The USPIIe-USB family of boards is available with standard VME ejector handles or VME64 injector/ejector handles. The handles shown in Figure A-1 (Step #1) are standard VME ejector handles, which pose no problem to screw- removal.

  • Page 113: Figure A-3 Hold The Baseboard Down Against Work Surface

    Figure A-3. Hold the Baseboard Down Against Work Surface Press upward with index finger as shown here. Figure A-4. Use Fingers to Apply Upward Pressure Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 114: Figure A-5 Separated Baseboard And Pmc Carrier Board

    A—Disassembling and Reassembling Boards (Themis USPIIe Family of Computers) Disassembling the Boards 3. After separation, carefully lay the PMC Carrier Board aside. You now have access to replace the battery (the yellow rectangular component adjacent to the heatsink) or install/remove a PMC Module from the baseboard (Figure A-5).

  • Page 115: Reassembling The Boards

    PMC/XMC Carrier Board Manual Reassembling the Boards These instructions depict how to reassemble a Themis Multi-Slot VME Computer, after having disassembled it for the purpose of accessing a PMC module or replacing a battery. 1. Place the USPIIe Baseboard on the work surface, component side up, with the metal faceplate closest to you (VME P1 and P2 connectors pointed away from you), as shown in Figure A-6.

  • Page 116: Figure A-7 Expected Gap Is Approximately 1/8"

    A—Disassembling and Reassembling Boards (Themis USPIIe Family of Computers) Reassembling the Boards Caution: Proper mating of the connectors is critical to avoid permanent damage to the assembly. If the connector and socket do not slip together halfway, from gravity alone, go back to Step 2 and re-check the alignment.

  • Page 117: Figure A-8 Press Down On The Pmc Interface Standoffs

    6. Apply a small amount of Loctite 222 MS (shown in Figure A-10) or a similar low- strength thread locker to the last few threads of all the screws. Refer to Figure A-11 and Figure A-12. Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 118: Figure A-10 Loctite 222Ms

    A—Disassembling and Reassembling Boards (Themis USPIIe Family of Computers) Reassembling the Boards 7. Install the faceplate screws and VME connector screws (refer to Figure A-1), but do not tighten until all the screws have been started. Applying the same amount of torque that was needed to loosen the screws, tighten all the screws.
  • Page 119 PMC/XMC Carrier Board Manual A-10 Themis Computer Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 120: Index

    10/100 Base-T 1-4, 1-15 VME P2 connector 2-8 10/100/1000 Base-T 2-6, 2-18 SB2801–SB2832 configuration 2-26 2P2 PMC Carrier Board 2P2 PMC/XMC Module Slot Connectors 2-3 audio connector 1-16 2P3 PMC Carrier Board block diagram 1-2 block diagram 3-2 component and connector diagram 1-26...
  • Page 121 2P3 PMC Carrier Board 3-23 2P2 PMC/XMC Carrier Board 2-32 connectors 2P3 PMC Carrier Board 3-21 2P2 PMC Carrier Board 1-4 to 1-17 front panel illustrations 2P2 PMC/XMC Carrier Board 2-6 to 2-19 2P2 PMC Carrier Board 1-25 2P3 PMC Carrier Board 3-4 to 3-13...
  • Page 122 E and F 1-14, 2-17 pinouts 1-14, 2-17 VME P1 connector 1-4, 1-5, 2-6, 2-7, 3-4, solder beads 2P2 PMC Carrier Board 1-17 to 1-24 VME P2 connector 1-7, 2-9, 3-7 audio I/O settings 1-19 Index-3 Themis Computer...
  • Page 123 1-20 PCB revision settings 1-20 2P2 PMC/XMC Carrier Board VME P2 connector 1-20 SB2801–SB2832 configuration 2-26 2P2 PMC/XMC Carrier Board 2-20 to 2-28 solder-bead settings 2-26 audio I/O settings 2-26 2P3 PMC Carrier Board 3-20 illustration of bottom-side locations 2-28 SB2801–SB2832 configuration 3-18...
  • Page 124 Place Stamp Here Themis Computer 47200 Bayside Parkway Fremont, CA 94538 Attn: Publications Department Fold here; tape at top to seal Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 125 Reader Comment Card We welcome your comments and suggestions to help improve the PMC/XMC Carrier Board Manual. Please take time to let us know what you think about this manual. • Information provided in the manual was complete. Agree___ Disagree___ Not Applicable___ •...
  • Page 126 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

This manual is also suitable for:

2p2 pmc/xmc2p3 pmc

Table of Contents