Kocchi's 772161M1 Manual page 4

Monitor menu operation instructions
Code Pairing
Automatic
conversion settings
1) Code Pairing：
Enter the menu ,select code pairing option, start pairing the
wireless signal code and countdown 20 seconds, please press
Please press pair key
pair key on camera side or connect(or reconnect) the power of the
on camera side
20
camera within the time, wait few seconds, code paired up and
image display successfully
2)Image settings:
- +
Enter the menu, select the image settings options menu, press
5
the confirmation button to enter the image settings:
- +
5
1.Brightness setting: 0-9 (left / right key adjustment step size)
+
-
2.Contrast settings: 0-9 (left / right key adjustment step size)
5
+ 3.Color settings: 0-9 (left / right key adjustment step size)
-
5
4. Volume control: 0-9 (left / right key adjustment step size)
3)Mirror settings:
Set the four states of the CAM1/CAM2 channel image:
F
F F
Positive image, mirror image, vertical flip image and vertical flip
mirror,Default state: Positive image.
4)Automatic switch mode settings:
1.Set up CAM1/CAM2 channel automatic switching mode to
turn on and off；
- + 2. Set CAM1/CAM2 channel automatic
5
switching mode time value 5~45,Default state: 5S.
Image Mirror
Setting
settings
MODE
Function Multi screen
mode setting
settings
Monitor menu operation instructions
5)Function settings:
1.Switch between NTSC and PAL，Default state:NTSC；
NTSC PAL
2.Set up the LED screen environment light source mode to
ON OFF
turn on and off；
3.Reversing scale setting: set up CAM2 channel reversing
ON OFF
scale open and close.
6)Multi screen mode display settings:
1 2 1. Settings screen can be switched to two-screen display,
SPLIT

1-2 OFF
open by default.
©Copyright 2020, Kocchis Technology All rights reserved.
Specifications subject to change without notice.