Download Print this page

ESS MIXHITS iSTREAM2 Installation Instructions

Congratulations on choosing MixHits Radio for your in-store music source! Here are some basic

instructions for installation. Should you have any questions, please don't hesitate to call us.

When you open the box, you should find the following:

Your new Mixhits player

The power supply

An Ethernet cable

A black RCA cable

A RCA "Y" adapter

The manual from the manufacturer.

ESS, Inc.

203 McMillin Street

Nashville TN 37203

615-340-9033

We Are Always At Your Service!

MIXHITS iSTREAM2

Installation Instructions

Table of Contents

Do you have a question about the MIXHITS iSTREAM2 and is the answer not in the manual?

Page 1: Installation Instructions
Nashville TN 37203 615-340-9033 We Are Always At Your Service! MIXHITS iSTREAM2 Installation Instructions Congratulations on choosing MixHits Radio for your in-store music source! Here are some basic instructions for installation. Should you have any questions, please don’t hesitate to call us.
Page 2 When you remove your player from its box, you will see that it has ports for connections on either side. It will look like this: In the majority of cases will need to connect only three cables to get the system going. First, locate the power cord in the box and connect one end to the power inlet and plug the other end into a normal power outlet on the wall.
Page 3 minutes to start, your music should start playing if you have it properly connected to your amplifier. Simply adjust the volume on your amplifier for the desired level. Connecting your player to your amplifier: Since can amplifiers differ greatly, here are some basic guidelines. We also have provided two examples: Your amplifier should have a jack on the back that will allow you to plug in a “RCA”...
Page 4 If you have just received a new Bogen C10 amplifier from us, please connect the speaker wiring as shown here: If you need further assistance, please call. ESS, Inc. 203 McMillin Street Nashville TN 37203 615-340-9033...