Download Print this page

Baraboo Durabrella Assembly Instructions page 4

Advertisement

1 1 1 1 W a l n u t S t r e e t
P O B o x 5 7
Step 4: Attaching fabric to the umbrella frame:
1. Place fabric cover over frame and center it, with corners of fabric lined
up with rafters and lace band pulled down over the outside of the
perimeter bars. The vinyl reinforcement patch on the seams of the
fabric protects the fabric from excessive wear on the corners of the
frame.
2. With Nylon zip ties supplied, lace fabric to umbrella frame
Start with the corners first and then proceed to the last.
Gradually tighten the ties until fabric is centered and drum tight.
3. Cut the excess of zip ties with the side cutting pliers or scissors. Cut close
enough to the end so there are no rough edges for the fabric abraid on
Option: Instead of using Nylon Zip Ties, use rope supplied.
When properly installed the Durabrella will provide years
carefree service. Please call if you have questions on installation
or care. We are at your service!
w w w . b a r a b o o a w n i n g . c o m
B a r a b o o
W I
5 3 9 1 3
To l l F r e e 8 0 0 - 3 3 2 - 8 3 0 3
TM
F a x 6 0 8 - 3 5 6 - 0 1 4 0

Advertisement

loading