Intermatic WP2000 Manual

WP2000
A REMOTE LOCATION MULTI-PURPOSE POST
This unit (weatherproof outlet box & cover) can be used outdoors or in wet locations
(protects receptacles and timers while in use for unattended applications). It is cCSAus Certified,
TYPE 3R rated and meets National Electrical Code requirements
Contents
The following items are included:
• Weatherproof cover & housing
• Base cover
• Toggle, round, GFCI and duplex inserts
• Baggie with mtg. hardware & reducer bushings.
Installation Instructions
1. Determine number and size of PVC connections to be
made to the base of the Multi-Purpose post.
2. Use provided plugs to cap any entrance ports on the
base that will not be used (DIAGRAM A).
3. Use appropriate PVC reducers and secure to the base
where needed. (DIAGRAM B for reducer orientation)
4. Secure any reducers and/or plugs with PVC glue.
5. Mount and secure base on PVC feeders with PVC glue.
6. Attach ground wire to ground bar (DIAGRAM D)
7. Attach Multi-Purpose post body to base using the four (4)
screws provided (DIAGRAM C)
Installation Instructions for use with wiring device only
8. Install selected wiring device to post according
to device manufacturer's instructions.
9. Install selected insert over device (DIAGRAM E). Select the right insert for the application. If
you need to remove the knockouts on the round insert, grab them from the back with pliers
and pry down until they break free. Using round insert, knock out the appropriate hole size.
Installation Instructions for Optional Timer:
10. Select the Intermatic PB912M10R or PB313K Timer (DIAGRAM F)
11. Remove blank cover from top of Multi-Purpose post (DIAGRAM F)
12. Feed selected timer through open base of Multi-Purpose post and mount using
screws provided (DIAGRAM F)
13. Attach Multi-Purpose post body to base using the four (4) screws provided (DIAGRAM C)
14. Wire using installation instructions provided with timer
Installations Instructions for Optional Photo Control
15. Select an Intermatic K40 series Photo Control
16. Determine hole size needed for mounting (DIAGRAM G)
17. Locate drill pattern on back of Multi-Purpose post and drill required outlet
18. Mount Photo Control in outlet port.
19. Attach Multi-Purpose post body to base using the four (4) screws provided (DIAGRAM C)
20. Wire according to installation instructions provided with Photo Control.
Installation Tips:
21. Optional Timer and/or Photo Controls should be mounted to Multi-Purpose post body prior
to mounting front device attaching body to bottom mounting plate.
22. Optional Timer and/or Photo Control wiring connections should be performed after
Multi-Purpose post body is attached to bottom mounting plate.
If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole option, free of charge. This warranty is extended
to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units
which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or
lamp bulbs, LED's and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal costs,
or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES. ALL IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS
LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED
WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along with proof of purchase, postage prepaid to the authorized
service center listed below. This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd., Spring Grove, Illinois 60081-9698/815-675-7000 http://www.intermatic.com Please be sure to wrap
the product securely to avoid shipping damage.
.
BASE
CAP UNUSED
HOLES WITH
PLUGS
DIAGRAM A
1/2" PIPE STOP
1" PIPE
INSTALL
DIRECTLY
INTO
BASE
1/2" PIPE
SCREW (4)
Limited One Year Warranty
I I N N T T E E R R M M A A T T I I C C I I N N C C O O R R P P O O R R A A T T E E D D
SPRING GROVE, ILLINOIS 60081-9698
BASE
BREAK OFF STOP
3/4" PIPE
FIRST INSTALL
REDUCER BREAK OFF
STOP AND INSTALL 3/4 PIPE
FIRST INSTALL
REDUCER BUSHING
INTO BASE INSTALL
1/2 PIPE TO STOP
HOUSING
BASE
DIAGRAM C
GROUND WIRE
DIAGRAM D
REMOVE
COVER
PB912M10R
TIMER
HOUSING
DIAGRAM G
DIAGRAM B
GROUND BAR
DIAGRAM E
KNOCKOUT REMOVAL
MOUNTING
SCREWS
PB313EK
HOUSING
DIAGRAM F
K40XX
PHOTO CONTROL
DRILL HOLE
TO MOUNT
PHOTO CONTROL
158WP12545