Kimball POLY Assembly Instructions

POLY™

Transport Dolly Assembly

Package Contents

Two (2) Frame Assemblies
•
Four (4) Connecting Pipe Assemblies
•
Eight (8) Hexagon Socket Screws with Lock Washers
•
Hexagonal Wrench
•

Assembly

1. Remove frames, connecting pipes and hardware from
packaging.
2. Place frames on level surface with the larger holes facing
upward. Identify the left and right frame by the orienta-
tion of the swivel caster (Figure A).
3. Insert a crossbar into one of the holes on the right frame
and fasten with lock washer and screw with hexagonal
wrench (Figure B).
4. Repeat for all four (4) cross bars (Figure C).
5. Insert the opposite ends of the crossbars into the left
frame and fasten with lock washers and screws with hex-
agonal wrench (Figure D).
6. Verify that all screws are firmly tightened prior to use
(Figure E).
7. Load dolly as shown in Figure F. Transport by applying
force to back top side of chairs (Figure F). Please note:
maximum loading is 30 chairs.
Figure A
Left Frame
Swivel Caster
Figure B
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
2520775, Revision -
Right Frame
Fixed Caster
Swivel Caster
Assembly Instructions
Figure C
Figure D
Figure E
Figure F
Fixed Caster
1
Transport
Direction
NOTE: MAXIMUM
LOADING IS 30
CHAIRS
Swivel Caster