Sharp EM-S60-WH Instruction Manual page 5

BEFORG USING YOUR HAND/STAND MIXER
For the first use, cleaning the beaters, dough hooks and bowl. Before assembling the
mixer, be sure the power cord is unplugged from the power outlet and the speed selector
is on the "0" position.
Fig.1
1. Align the hole below the back of the hand mixer with the tuber on top of base,
then press down vertically with a little force. Make sure it is assembled correctly
(Fig.1). For detaching the hand mixer, push the hand mixer in the arrow
indicated direction (Fig.2). Hold the head of mixer to tilt position and pressing
the base switch (Fig.3).
2. Choose the proper attachments based on the task to be performed and
assemble it in position. Beaters are for mixing egg white or mixing other liquid.
Dough hooks are for kneading the dough.
Note: Beaters and dough hooks, the one with gear can only be inserted into the
socket with graphics and the other one can only be inserted into the other socket.
The two beaters and two dough hooks cannot be inserted in reverse.
3. Place the food for blending into bowl, then place the bowl on position.
4. Lower down the head of mixer and pressing the base switch (Fig.4).
5. Ensure that the unit is at the 0 setting, then connect to power supply.
Fig.2
4
4
Fig.3
Fig.4