Summary of Contents for Caladair ED-TOUCH
- Page 1 ED-TOUCH TOUCH SCREEN REMOTE CONTROLLER OPERATING AND COMMISSIONING INSTRUCTIONS MS-REL-001 Ind B Maj. 20/06/2017 Créé par : JC Validé par : AR Page 1/8...
-
Page 2: Table Of Contents
ED-TOUCH TOUCH SCREEN REMOTE CONTROLLER OPERATING AND COMMISSIONING INSTRUCTIONS TABLE DES MATIERES RECEIVING THE EQUIPMENT ......................... 2 I.1. Checks on reception ........................2 I.2. Unpacking ............................3 I.3. Storing ............................3 INSTALLATION ............................3 II.1. INSTALLATION ..........................3 II.2. Wiring ............................. 3 II.2.a. -
Page 3: Unpacking
II.1. INSTALLATION The Touch screen remote controller can be installed on a walla or a cabinet. Install ED-TOUCH such that bad weather or ambient temperature cannot damage the internal items of the unit during installation as well as when used later. -
Page 4: Ii.2.C. Exaeco
TOUCH SCREEN REMOTE CONTROLLER OPERATING AND COMMISSIONING INSTRUCTIONS II.2.c. EXAECO II.3. Activation For old unit (before 2016) you have to activate the ED-TOUCH. Please follow the procedure bellow. On the display supplied with the unit, enter access right 1111. Access right Enter... -
Page 5: General Operation
OPERATING AND COMMISSIONING INSTRUCTIONS III. GENERAL OPERATION The ED-TOUCH is a user display and service display thanks emulator integrated into accessible via password. III.1. Centrale operating : menu tree As long as the unit is running normally, you will return to the home screen bellows. The logo in the upper left indicates the... -
Page 6: Iii.1.B. Screen 2 : Main Menu
ED-TOUCH TOUCH SCREEN REMOTE CONTROLLER OPERATING AND COMMISSIONING INSTRUCTIONS III.1.b. Screen 2 : main menu Return to the home screen Acces to OFFSET menu Access to information menu Access to configuration menu Acces to extended operation menu III.1.c. Screen 3 : Offset temperature... -
Page 7: Iii.1.E. Screen 5 : Information Menu
ED-TOUCH TOUCH SCREEN REMOTE CONTROLLER OPERATING AND COMMISSIONING INSTRUCTIONS III.1.e. Screen 5 : Information menu Return to the home screen Possibility to acces to the main information about the Possibility to enter phone unit. (password 3333) number. This number will... -
Page 8: Iii.3. Unit Stopped Due To A Default : Menu Tree
IV. Use EDTOUCH as room setpoint ED-TOUCH can be used as room sensor for room control. To activate this function : Access to the emulator (screen 2) Follow the unit instruction to change the temperature control mode.