Advertisement
1
ALARM 1, ALARM 2
2B
SET TIME/PROGRAM
2A
HOUR, MIN
ENGLISH
1
Power supply
Connect the power plug to the wall outlet
•
2
Setting the Clock and Alarm
Step A: Setting the Clock time
1. Check the set is switched off
2. Press SET TIME/PROGRAM
3. Hold down or press HOUR/ MIN repeatedly to adjust the hours and minutes
respectively. Release HOUR/ MIN when you have reached the correct
4. Press SET TIME/PROGRAM to confirm.
Helpful hints: If no action is executed within 10 seconds, the display will return to previous
time setting
Step B: Setting the Alarm time and mode
1. Check the set is switched off
2. Press ALARM 1 or ALARM 2 once or more to switch on the alarm and
select tuner, CD or buzzer alarm modes.
3. Hold down or press HOUR/ MIN repeatedly to adjust the hours and minutes
respectively. Release HOUR/ MIN when you have reached the correct setting.
4. Press SET TIME/PROGRAM to confirm.
3
ways to switch off the alarm
• During the alarm call, press ALARM RESET/ y y .
• During the alarm call, press REPEAT ALARM.
•Press ALARM 1 or ALARM 2 once or more until the AL1 or AL2 disappears.
3
Listening to the Radio
a
Press y y to switch on the set.
b Press CD/TUNER once or more to select TUNER.
c
Press and hold SET TIME/PROGRAM until the frequency and PROG flash.
•
Available stations are programmed (10 FM and 10 AM).
d Press AM/FM 9 to select your desired waveband, AM or FM.
e Press the PRESET3,4 buttons once or more until the desired preset station is dis-
played.
setting.
4
Playing a CD
This player plays Audio Discs including CD-R/CD-RW.
Lift the CD door at 2 LIFT TO OPEN.
a
b Insert a CD with the printed side facing up, and close the CD door.
c
Press y y to switch on the set.
d Press CD/TUNER once or more to select CD.
38
e Press
To stop CD playback, press 9.
f
3c
3d
3e
4f
to start playback.
3a
3b
4c
4d
4a
4e
Advertisement
