Nevco 972-0291 Manual

4
1/4" Flat Washers
D
1/4" Lock Washers
1/4" Nuts
C
Steps for Installation of mounting bracket and inside reinforcement
1. Remove either end piece of the sign and slide the face out. If the
face is in more than one piece then both end pieces must be
B
removed.
2. Clamp 026-0009 Mounting Bracket to the back lip of the sign
cabinet at the desired mounting location. Drill 3/8" holes in the
cabinet using 026-0009 as a guide.
3. Align the 972-0291 reinforcement with the 3/8" holes and mount
972-0291 to the inside of the sign cabinet with the 3/8" hardware
provided with the sign.
4. Drill 1/4" holes in the back of the sign cabinet using 972-0291 as
a guide and attach the other side of the reinforcement using the
1/4" hardware provided.
A
5. The mounting brackets on the sign should align with the
mounting posts for outdoor signs.
6. Large signs may have extra mounting brackets.
4
3
3/8" Bolts
026-0009 Mounting Bracket
1/4" Bolts
1/4" Flat Washers
972-0291 Inside Reinforcement
3/8" Flat Washers
3/8" Lock Washers
3/8" Nuts
3
2
972-0291 Inside Reinforcement Detail
2 Each
5/16" Holes
026-0009 Mounting Bracket Detail
2 Each
7/16" Holes
Installation
Type 'ADL' Sign
Indoors and Outdoors
Drawing No.
Drawn Date
9/25/12 Sheet
EJJ
2
1
Rev
A
2Each
7/16" Holes
D
C
B
A
Nevco, Inc.
Greenville, Illinois 62246
275-0629
of
1 7
1