Overview - Kogan KAR0514GMDA Quick Start Manual

Overview

①Power indicator
②Network mode indicator
③Wi-Fi indicator
④LAN indicator
⑤Signal strength indicator
⑥Power button
⑦⑧LAN port
⑨Back cover
⑩Power port
⑪WPS button
⑫Reset button
○
SIM card slot
13
○
USB port
14
On: the device is powered on
Off: the device is powered off
Steady blue light: connected to a 4G/3G network
Blue flickering light: 4G/3G data transfer
Steady red right:
---The SIM card is not recognised, the PIN has not been
entered or the PIN verification failed.
---Failed to connect to a mobile network or an Ethernet
network.
Red flickering light: Looking for network
Steady on: Wi-Fi turned on
Off: Wi-Fi turned off
Steady light: at least one of the LAN ports is connected to a
device
Blinking light: data is being transmitted through a LAN port
Off/no light: No device is connected to a LAN port
On: signal reception available (more bars mean better
reception)
Off: no reception.
Press the button to power the device on or off
Connect to computer, switch or other LAN device.
Connect to compatible power adapter.
Press for 2 seconds to active WPS connection when Wi-Fi is
turned on
!! Restoring the default settings of the device will erase all
previous settings.
When the device is powered on ,press the reset button and
hold for about 8 seconds to restore the device to its factory
settings. After the factory defaults are restored, the device will
restart automatically.
Install a standard SIM card to access the internet via an LTE
data connection.
Connect to compatible USB adapter. (Only for upgrading
software)
4