Advertisement
Fault codes
and
Descriptions
Water tap not turned on.
Insufficient water supply pressure.
Water inlet hose is crimped or bent,
No water
so no or not enough water gets to
the dishwasher.
Drain hose is not connected
correctly.
Flood switch activated.
Flooding
Water flow error.
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60FC4W1/User_Guide_DW60FC4W1/15_Fault_codes
Possible Causes
Ensure the water is connected and turned on. Press
to restart the dishwasher.
Check household water pressure.
Check the water inlet hose and
straighten if needed. Press
to restart the dishwasher.
Ensure that the drain hose is connected in accordance with
the installation instructions.
Turn the dishwasher OFF and ON again. If fault persists, turn
water off and disconnect the dishwasher from the power
supply. Call Customer Care.
Switch dishwasher OFF and ON again. If fault persists call
Customer Care.
What to do
Updated: Sat, 15 Feb 2020 09:20:35 GMT
Powered by
2
Advertisement
