PDi -530-WEIGHT Manual

Weight block

Advertisement

Better Solutions Are Within Reach
MODEL NUMBER:
®
Installation of Weight Block

Graphical Symbols

This lightning flash with arrowhead symbol, within an equilateral
is intended to alert the user of the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
RISK OF ELECTRIC
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

Important Safety Instructions

PLEASE READ AND KEEP THESE INSTRUCTIONS. OBSERVE
ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS
CONTAINED IN THESE SAFETY INSTRUCTIONS AND THOSE
ON YOUR TELEVISION. RETAIN THESE INSTRUCTIONS FOR
FUTURE USE.
Electrical energy can perform many useful functions. This unit
has been engineered and manufactured to assure your personal
safety. However, improper use can result in potential electrical
shock or fire hazards. In order not to defeat the safe-guards
incorporated on this receiver, observe the following basic rules
for its installation, use and servicing. Your television is fully
transistorized and does not contain any user serviceable
components. Removal of the cabinet cover may expose you to
dangerous voltages. Refer all servicing to qualified service
personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do no block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat source such as radiators, heat
registers, stove, or other apparatus (including amplifiers) that
produce heat.
PDI-530-WEIGHT
CAUTION
SHOCK,
Document Number:
PD196-394R1
Page 1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDI-530-WEIGHT and is the answer not in the manual?

Questions and answers

Summary of Contents for PDi PDI-530-WEIGHT

  • Page 1 MODEL NUMBER: Document Number: PD196-394R1 PDI-530-WEIGHT ® Better Solutions Are Within Reach Installation of Weight Block Page 1 of 8 Graphical Symbols This lightning flash with arrowhead symbol, within an equilateral is intended to alert the user of the presence of uninsulated “dangerous voltage”...
  • Page 2 To avoid damage to the surface of the television, test a small portion of the TV’s cabinet with any new disinfectant to verify that the disinfectant will not discolor or soften the enclosure. PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066...
  • Page 3 REMOVE 7/16 ACORN NUT FROM SAFTY PIN REMOVE SAFTY PIN FROM THE NOSE WARNING: REINSTALL SAFTY PIN IN ARM LOCKING HOLE PRIOR TO PERFORMING THIS PROCEDURE LIFT NOSE COVER PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 Phone 937-743-6010 Fax 937-743-5664...
  • Page 4 5. SLIDE CONNECTOR COVER BACK AND DISCONNECT CABLE 6. REMOVE NUT USING 7/16 WRENCH, AND DISCARD 7. REMOVE RETAINING PLATE, AND DISCARD 8. SLIDE THE P-9 STRAIGHT FORWARD PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 Phone 937-743-6010 Fax 937-743-5664...
  • Page 5 PROCEDURE 1. REMOVE ALLEN HEAD CAP SCREW FROM THE NOSE USING A 3/16 ALLEN WRENCH, AND DISCARD 2. INSTALL THE NEW TV PER THE NEW TV INSTRUCTIONS PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 Phone 937-743-6010 Fax 937-743-5664...
  • Page 6 Page 6 of 8 3. RECONNECT CABLE AND TIGHTEN WITH (2) 7/16 WRENCHES 4. SLIDE CONNECTOR COVER OVER THE OTHER COVER 5. INSERT PDI-530-WEIGHT 6. PLACE CABLE INTO NOSE AS SHOWN 7. INSTALL SUPPLIED NOSE COVER CLIPS, FOLLOWING INSTRUCTION PD196-098.
  • Page 7: For More Information

    BE INSTALLED, FOLLOW INSTRUCTIONS FOR PIN STORAGE WHEN USED WITH COVER KIT). 9. RE-ADJUST ARM FOR PROPER BALANCE FOR MORE INFORMATION IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO CONTACT PDI’S ENGINEERING DEPARTMENT AT 937-743-6010 PDI Communication Systems, Inc. 40 Greenwood Lane...

Table of Contents