Operating Elements And Connections - LeuchtKraft WASH-42LED Instruction Manual

Contents
1 Operating Elements and Connections � � 12
2 Safety Notes � � � � � � � � � � � � � � � � 13
3 Applications � � � � � � � � � � � � � � � � 13
4 Installation� � � � � � � � � � � � � � � � � 13
5 Setting the Spotlight into Operation � � 14
6 Operation � � � � � � � � � � � � � � � � � 14
7 Operation without DMX Controller � � � 14
7�1 Master / slave operation � � � � � � � � � � � 14
8 DMX Controller � � � � � � � � � � � � � � 15
8�1 Connection � � � � � � � � � � � � � � � � � 15
8�2 Setting the number of DMX channels� � � � � 15
8�3 Setting the start address � � � � � � � � � � � 15
9 Additional Functions � � � � � � � � � � � 16
9�1 Inverting the pan direction � � � � � � � � � � 16
9�2 Inverting the tilt direction � � � � � � � � � � 16
9�3 Limiting the pan angle � � � � � � � � � � � � 16
9�4 Limiting the tilt angle � � � � � � � � � � � � 16
9�5 Rotating the display � � � � � � � � � � � � � 16
9�6 Resetting the unit � � � � � � � � � � � � � � 16
10 Specifications � � � � � � � � � � � � � � � 17
10�1 DMX functions � � � � � � � � � � � � � � � � 17
10�1�1 8-channel mode � � � � � � � � � � � � � � 17
10�1�2 13-channel mode � � � � � � � � � � � � � 17
10�2 Menu structure� � � � � � � � � � � � � � � � 18
12
Moving Head
These instructions are intended for installers of
the unit and for users with basic knowledge in
DMX control . Please read the instructions care-
fully prior to operation and keep them for later
reference .
All operating elements and connections de-
scribed can be found on page 2 .
1 Operating Elements
and Connections
1 Operating buttons
MENU to select a menu item
UP and DOWN to set values or menu options
ENTER to call up a menu item and to save a
modification
2 Display
3 Mains jack for connection to a socket
(230 V / 50 Hz) via the mains cable provided
4 Support for the mains fuse
Always replace a blown fuse by one of the
same type .
5 DMX signal input (3-pole XLR) for connecting
a light controller;
Pin 1 = ground, 2 = DMX−, 3 = DMX+
6 DMX signal output (3-pole XLR) for connec-
tion to the DMX input of another DMX light
effect unit;
Pin 1 = ground, 2 = DMX−, 3 = DMX+
7 Ring bolt for fastening a safety rope
8 Fastening screws (hexagon socket screws) for
the mounting bracket
9 Mounting bracket