Advertisement
Operating Instructions (continued . . .)
Low Battery Warning
Data Logging
The Thermohygrometer can be configured to record
measurements to internal memory which can
subsequently be transferred to a personal computer for
analysis and archiving.
This process requires a copy of the Tinytag Explorer
software, part number SWCD-0040, and a PC download
cable, part number CAB-0007-USB. Refer to the
documentation supplied with the software for detailed
operating instructions.
To conserve power when logging, the display should be
switched off.
The unit will continue to record even if the screen is
blank.
8
The
symbol will indicate when the
batteries need replacing.
Note: To prevent data loss, always
ensure that logging is not active, and
the display is off, before removing the
batteries.
The
symbol indicates that the unit
is recording.
A flashing
the unit has been set to record and will
start after a programmed delay.
symbol indicates that
Advertisement
