Advertisement
the rear hydrostat hose fitting slightly downward to
gain clearance with the rear wheel motor.
2. Tighten all fittings securely. Use a back up wrench
on the fittings when appropriate.
3. Secure the hoses with nylon tie straps, if applicable.
Important: Check to make sure the hoses are
secured away from any hot, sharp or moving
components.
4. Fill the hydraulic reservoir with the proper hydraulic
oil. Refer to the Operator's Manual for the oil
specifications.
5. Carefully operate all the machines hydraulic functions
to ensure that nothing contacts the hoses or fittings.
Make any required adjustments to the hoses or
fittings.
6. Check the hydraulic oil again and replenish if
required.
2
Advertisement
