Summary of Contents for rough country 13-18 RAM 1500
Page 1
921077500 13-18 RAM 1500 Rear Bumper Thank you for choosing Rough Country for all your vehicle needs. Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go.
Page 2
INSTALLATION INSTRUCTIONS 1. Place the vehicle in park. 2. Unplug the trailing wiring harness from bumper. See Photo 1. 3. Unplug the license plate lights at connector and any other wiring leading to rear bumper. See Photo 2. Photo 1 Photo 2 4.
Page 3
10. If the vehicle is not equipped with factory proximity sensors, install the supplied rubber plugs and plastic caps in the holes in the bumper. See Photo 7 & 8. Photo 7 Photo 8 11. Install the factory proximity sensors (if equipped) into the new bumper, Secure with the supplied 4mm allen head bolts. 12.
Page 4
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applica- ble Federal, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buy- ers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold.
Need help?
Do you have a question about the 13-18 RAM 1500 and is the answer not in the manual?
Questions and answers