COMPACT SATELLITE CONVERTOR (REF. 9780) 1. I NTRODUCTION 1.1. Product description The 9780 is the new generation convertor for satellite signals to be used in MDU’s. The compact plug-and-play module has a straightforward and easy configuration. • programmable satellite IF convertor •...
COMPACT SATELLITE CONVERTOR (REF. 9780) 1.4. Hardware installation 1: T IGURE OP VIEW OF PRODUCT 1.5. Mounting the Compact Satellite Convertor • Important: Mount the module vertically to a wall in a well-ventilated room and leave a minimum space of 15 cm around the product to guarantee a maximum ventilation of the product •...
Configuring the Compact Satellite Convertor AVIGATING THROUGH THE MENU Use the Johansson rotary/push button to navigate through the menu. This is very straightforward and simple. The table below shows how the rotary/push should be used: Push the button 2s to enter the basic configuration.
Page 6
COMPACT SATELLITE CONVERTOR (REF. 9780) NPUT SETTINGS AUTOSCAN STARTING WITH COPY INPUT 1 DISPLAY READOUT EXPLANATION Copy input: scan and detect the available transponders (up to 32) and put them on the output. Note: this function is only applicable for Input 1.
Page 7
COMPACT SATELLITE CONVERTOR (REF. 9780) NPUT SETTINGS MANUAL STARTING WITH INPUT SAT 1 DISPLAY READOUT EXPLANATION Tap INPUT SAT 1 to enter the menu to configure input 1 manually.Rotate the button to go down in the menu. DC: Decide whether the input should provide power to an LNB or external amplifier.
COMPACT SATELLITE CONVERTOR (REF. 9780) To delete a transponder, position the arrow on the transponder and press the rotary button 3 seconds. DISPLAY READOUT EXPLANATION To delete a transponder, position the arrow on the transponder and press the rotary button 3 seconds.
COMPACT SATELLITE CONVERTOR (REF. 9780) ADVANCED SETTINGS DISPLAY READOUT EXPLANATION language of the Compact Satellite Convertor can be set to English, Italian, Spanish or French. Tap FW VERSION to check the firmware version of the device. Tap SERIAL NUMBER to check the serial number of the device.
COMPACT SATELLITE CONVERTOR (REF. 9780) 2. T ECHNICAL PECIFICATIONS Compact Satellite Convertor – 9780 Inputs 4 SAT (wideband/quattro/quad) Outputs 1 main (SAT) + 1 test port (-30dB) SAT Input Frequency range 290 - 2340 SAT Output Frequency range 290 - 2340 SAT Input level dBµV...
COMPACT SATELLITE CONVERTOR (REF. 9780) 3. S AFETY NSTRUCTIONS Read these instructions carefully before connecting the unit To prevent fire, short circuit or shock hazard: • Do not expose the unit to rain or moisture. • Install the unit in a dry location without infiltration or condensation of water.
COMPACT SATELLITE CONVERTOR (REF. 9780) 4. C ONDITIONS OF WARRANTY Unitron N.V. warrants the product as being free from defects in material and workmanship for a period of 24 months starting from the date of production indicated on it. See note below.
Need help?
Do you have a question about the 9780 and is the answer not in the manual?
Questions and answers