Operation - Toro 51611 Operator's Manual

6. Install the flange (A) on the hose and the
flange (A) on the bag opening into the slot on the
front bag frame, ensuring that both flanges are
secured by the tabs on the frame.
A
7. Slide the strap on the back of the bag over the
rear frame.
Note: You should not have any extra parts.
2

Operation

Connecting the Vacuum
Hose
Connect the vacuum hose to a Toro blower/vacuum
(models 51573, 51591, and 51598).
Connect the vacuum hose to a blower/vacuum not
listed previously, as follows:
1. Connect the vacuum
hose to the adapter.
2. Remove the blower
tube from the
blower/vacuum.
3. Install the adapter
over the blower/vacuum
outlet, securing it with
m-6932
the hook and loop strap.
4. Loop the long
adapter strap over the
blower and pull it tight
securing the adapter to
the blower.
Important: When pulling the leaf cart, ensure that
you hold onto the vacuum hose. Do not pull it using
the blower/vacuum.
Emptying the Bag
To empty the bag, complete the following:
1. Remove the vacuum hose and bag from the bag
frame.
2. Remove the vacuum hose from the bag.
3. Open the zipper in the bag to dump the contents.
4. Close the zipper before installing the bag onto the
cart as described in Setup.
Important: Periodically examine the bag for wear or
deterioration. If you find any, replace the bag.
3350-218
m–6944
m-6933