Ozito PXHTWLS-4000 Instruction Manual
Ozito PXHTWLS-4000 Instruction Manual

Ozito PXHTWLS-4000 Instruction Manual

Hybrid twin led worklights & tripod

Advertisement

Quick Links

HYBRID TWIN
LED WORKLIGHTS
& TRIPOD
INSTRUCTION MANUAL

SPECIFICATIONS

Input:
18V DC or 220-240V AC
Power:
2 x 20W
Light Output:
2 x 2,000lumens
Colour Temperature: 5,000K
Ambient Temperature: 25°C (Max)
Rotation Range:
360° (in 2 axes)
Tripod Height:
850 - 1,780mm
Weight:
4.965kg
ozito.com.au
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
OZITO
Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
WARRANTY
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
STANDARD EQUIPMENT
2 x Hybrid Worklights
Mounting Bar, Cable Junction
& Tripod
3 x Fastening Knobs, 3 x
Washers & 2 x Wingnuts
PXHTWLS-4000
0419

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PXHTWLS-4000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito PXHTWLS-4000

  • Page 1: Specifications

    Tripod Height: 850 - 1,780mm Weight: 4.965kg ozito.com.au PXHTWLS-4000 WARRANTY IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
  • Page 2: Know Your Product

    BATTERY & CHARGER This tool is compatible with all batteries & chargers from the Ozito Power X Change 2. Insert the assembly through the range. hole on one end of the mounting...
  • Page 3 2. ADJUSTING THE TRIPOD 3. CHANGING LIGHTING DIRECTION Setting Up The Tripod Base Turning The Worklights 1. Loosen the leg fastening knob on the stem of the tripod by turning it 1. Each worklight can also be anti-clockwise. rotated individually by loosening the fastening knob on the frame of the worklight slightly, and 2.
  • Page 4: Operation

    1. Plug the socket plugs into the rear of the worklights. Note: The cable can’t be plugged into the worklights with a battery in place. Remove any attached battery before installing the AC cable. 2. Plug the 3-pin power plug into an AC power outlet. PXHTWLS-4000...
  • Page 5: Maintenance

    SPARE PARTS Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the device by an unauthorised person or by mishandling. Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse.
  • Page 6: Electrical Safety

    Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New risk of fire and electric shock.

Table of Contents