MECHANICAL INSTALLATION FEATURES E6 EQ7 1. Select the desired location to mount until under the dash board. 1. Active gain Equalizer with adjustable input sensitivity. 2. Fix the mounting bracket underdash or hump with (4) screw. Be 2. Master volume control with up to 7 volta RMS of output. careful when drilling so as not to damage existing wiring under the dash board.
Page 3
E6 EQ7 Power Supply 11-15 VDC Negative Ground Max Output Voltage 7V RMS Pre Graphic Frequency 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz 6KHz, 12KHz Equalization Range +12dB Subwoofer Frequency 43~120Hz, 60~200Hz Input Impedance 10K Ohms S/N Ratio 90dB T.H.D. 0.03% 1. FADER CONTROL Channel Separation 70dB This control adjust the volume between the front and rear in 4 speakers system.
Need help?
Do you have a question about the E6EQ7 and is the answer not in the manual?
Questions and answers