Do you have a question about the RK15 and is the answer not in the manual?
Questions and answers
Summary of Contents for IMC RK15
Page 1
REEL KLEEN RK15 RK15 REEL KLEEN RK15 INSTALLATION, OPERATING AND MAINTENANCE MANUAL PLEASE LEAVE WITH OPERATOR A34/074 R1 ECN 8662 SEPTEMBER 2017 P a g e...
REEL KLEEN RK15 EC DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY (Guarantee of Production Quality) We, Imperial Machine Company Limited of: Unit 1, Abbey Road, Wrexham Industrial Estate, Wrexham, LL13 Declare under our sole responsibility that the machine REEL KLEEN RK15...
REEL KLEEN RK15 GUARANTEE This equipment is guaranteed by IMC for 1 year from the date of its purchase from IMC, or from one of its stockists, dealers or distributors. The guarantee is limited to the replacement of faulty parts or products and excludes any consequential loss or expense incurred by purchasers.
SAFETY Please read this manual carefully and follow the instruction. This manual contains important information concerning the operating features of the REEL KLEEN RK15, as well as safety precautions to be taken before, during and after installation. The following safety precautions call attention to potentially dangerous conditions.
REEL KLEEN RK15 GENERAL INSTRUCTIONS These suggestions are designed to aid you in the installation. Please read them carefully for proper installation, which will ensure that the products will give long and dependable service, with a minimum of maintenance. 1. Shut off water supply at main source and open faucets to drain lines.
REEL KLEEN RK15 INSTALLATION Caution: Instruct operators in the safe, proper use and maintenance of the hose reel. Keep this manual for future reference. Warning: Failure to read, understand and follow these instructions may result in personal injury or even fatality.
REEL KLEEN RK15 SERVICE Caution: Before attempting any service, always cut off supply input and remove all mainspring tension. A. Hose replacement: 1. Remove screws (item 36 – see parts list on page 17), washers (37) and nuts (43) from base or swivel plate (38 or 32).
Page 20
REEL KLEEN RK15 5. To reassemble, reverse above procedure. Note: Spring is completely self-contained and safe to handle. Caution: When reassembling ratchet and spring assembly (7), be sure arrow on ratchet plate aligns with alignment hole in drum (8). 20 |...
REEL KLEEN RK15 ADJUSTMENTS A. Ratchet lock: The ratchet lock works with reel mounted in any position and needs no adjustment. To disable ratchet, remove the ratchet spring (41), ratchet prawl (44) and shaft lever (40). B. Hose guide: The canopy guide (9) may be set at any position around the drum assembly (8).
REEL KLEEN RK15 CONTACT DETAILS For installations outside the UK please contact your supplier. For information on IMC service support (if applicable), please call IMC on +44 (0) 1978 661155. Alternatively, contact us via email or fax: IMC Spares Desk Fax: +44 (0) 1978 667759 E-mail: spares@imco.co.uk...
Need help?
Do you have a question about the RK15 and is the answer not in the manual?
Questions and answers